KEYPAD FUNCTIONS, CONT.
This is the LOCK/RELEASE key. It is used to lock and release (unlock) the
display. If the HOLD feature was enabled during setup and calibration,
pressing this key (after obtaining a stable weight) will cause the indicator to
lock onto the weight. Pressing this key again will release (unlock) the display
and return it to z
ero.
ndex
ation.
If AUTO LOCK feature was enabled, weight display will lock after placing a
load on the scale and obtaining a stable weight. Pressing this key will release
(unlock) the display and return it to zero, or if another load is applied, lock onto
new weight after obtaining a stable weight. Note that the lock feature is for
non-commercial (NOT "Legal for Trade") applications.
Body Mass Index (BMI) Functions
The H /
(BMI/ENTER) key serves several purposes. First,
during setup parameters, pressing it will display the current
setting of the parameter. Second, it is used to signal completion
of the data entry and causes the indicator to process the data
entered. Third, it is used during normal operation to enter the
height (feet and inches or centimeters) for the Body Mass I
(BMI) calcul
NOTE! Unless the weight display is stable, the indicator will not
respond to pressing the H /
(BMI/ENTER) key.
Arrow Keys
The arrow keys are used during setup and calibration to select setup values. During operation,
they are used to increase or decrease the BMI height values. Pressing the a or b keys will
increment or decrement the value of the selected digit. Pressing the _ or ` will move the
cursor (blinking character) to the next character position. Pressing the H /
(BMI/ENTER) key
will save the value entered and advance to the next prompt. Note, that when moving through
the setup prompts, the default or previously selected value appears first on the display.
Pressing the a or b keys during normal operation will enter a weight recall option allowing the
last 10 weights recorded to be reviewed. The weight is recorded each time the weight is
locked. The ZERO key can be used to clear the recorded values. Use the a or b keys to
scroll through the 10 records. Press any other key to return the indicator to normal operation.
Note that while reviewing the recorded weights, the display will alternate between the
transaction number and the weight.
/
(Down Arrow/Print)
During operation, the b/
(Down Arrow/Print) key is used to signal completion of the data
entry, process the data entered and print the data if a printer is used.
NOTE! The indicator will not respond to pressing the b/
(Down Arrow/Print) key unless the
weight display is stable.
8555-M483-O1 Rev A x 750 Owner’s
9
To Next Page
Loading...
Need help?
General
