3300-0192-0M Rev D 01/17 9
KEYPAD FUNCTIONS
DO NOT operate the keys or touchscreen with pointed objects (pencils, pens,
etc.). Damage to keys or touchscreen resulting from this practice is NOT
covered under warranty.
This is the Power key. With the scale off, pressing this key will apply power to
it and turn on the display. If the scale is already on, pressing the key will turn it
off.
This is the Zero key. Press and release this key to reset the display to zero, up
to 100% of the scale capacity.
This is the Lock/Release key. Press and release this key, or touch the weight
readout on the display to cause the weight, height, and BMI to lock on the
current values until the key is pressed again or the weight readout on the
display is touched again. While the weight is locked, the weight status will
change to LOCKED in order to denote that the weight is being held.
This is the ID key. Press and release this key to open the ID entry screen
where you can use the touch screen to enter in a numeric ID. This ID is NOT
used for tracking patient measurements. The ID that is entered is only
transmitted out of the communication port when the
key is pressed. To
change or edit the ID, simply press the ID key again to return to the ID entry
screen.
This is the Display Mode key. Press and release this key to cause the display
to cycle between display modes: Weight/Height/BMI or Weight only.
To Next Page
Loading...
Need help?
General
