P.21
12.2 - First usage
The automa!on may only be used for the first !me once all the checks described in the TESTING chapter have been performed successfully.
The automa!on may not be used in precarious or temporary condi!ons.
a) Compile a technical file for the automa!on, which must include at least:
• a general mechanical and electrical diagram,
• risk analysis and solu!ons adopted for elimina!ng or reducing risks,
• manuals of the individual components,
• list of the components used,
• instruc!ons for use and warnings concerning use by the owner,
• system maintenance record
• declara!on of the system's CE conformity
b) Fix a CE marking plate to the gate, bearing at least the following informa!on:
• Name and address of the party responsible for installa!on and tes!ng;
• Type of automa!on,
• model,
• registra!on number,
• year of installa!on,
• CE mark.
c) Fill in the declara!on of conformity and give it to the owner of the automa!on.
d) Compile the guide with the instruc!on manual and give it to the owner of the automa!on.
e) Compile the maintenance and improvement log and give it to the owner of the automa!on.
f) Compile the guide containing the instruc!ons for maintenance that provides instruc!ons concerning the maintenance of all automa!on
devices and give it to the ow ner of the automa!on.
g) Before the first use of the automa!on, the owner must have been given adequate informa!on concerning hazards and residual risks.
13 - SAFETY INSTRUCTIONS AND WARNINGS
13.1 - Instruc!ons and warnings for use
• It is the fi#er's duty to perform risk analysis and inform the user/owner of any exis!ng residual risks. Any residual ri sk detected must be
recorded
• The following residual risks are usually present in moving gates: impact and crushing against the main closure surface (of the single leaf or
between the two leaves); impact and crushing in the opening area; crushing between the mobile and fixed guide and support parts during
movement.
• The Manufacturer will not accept responsibility for damage or injury caused by the non-observance of the informa!on on use contained in this
manual, and the failure to observe the safety indica!ons given below.
• The Manufacturer declines responsibility for damage and malfunc!ons caused by non-compliance with the instruc!ons for use.
• Keep this manual in a safe and easily accessible place so that it can be consulted rapidly when necessary.
• Before ac!va!ng the gate ensure that all persons are at a safe distance.
• Never touch the gate or moving parts when they are in mo!on.
• Remain at a safe distance when the gate is in mo!on: only pass when the gate is completely open and immobile.
• Do not allow children to play with gate controls; do not leave radio controls or other control devices within children's reach .
• Prevent children from playing or standing in the vicinity of the gate or the control organs (radio controls). The same precau!ons should be
adopted for disabled persons and animals.
• In the event of malfunc!ons (noisiness, jerky movements, etc.) suspend the use of the automa!on immediately:: failure to observe this rule
may entail serious hazards, risks of accidents and/or serious damage to the gate and the automa!on. Contact a PROFESSIONAL FITTER and in the
mean!me use the gate manually by disconnec!ng the operator (see the OPERATOR/ACTUATO R RELEASE chapter) OPERATOR/ACTUATOR
RELEASE chapter) of the operator manual.
• In order to maintain the automa!on in efficient condi!ons, ensure that the opera!ons indicated in the MAINTENANCE chapter are performed at
the frequency indicated by a PROFESSIONAL FITTER.
• Examine the installa!on frequently in order to check that there are no signs of mechanical unbalance, wear and damage to the wires and
assembled parts: do not use the operator un!l the necessary repairs or adjustments have been made.
• Should liquids penetrate inside the control unit, disconnect the electricity supply and contact the Manufacturer's Assistance Service immediately;
use of the control unit in such condi!ons may cause hazard situa!ons. The automa!on may not be used in these condi!ons, even with buffer
ba#eries (op!onal).
• If a problem arises that cannot be resolved using the informa!on contained in this manual, contact the Manufacturer's assistance service.
To Next Page
Loading...