P.19
9 - GENERAL INFORMATION
It is strictly forbidden to copy or reproduce this instruc!on manual without wri"en permission and subsequent verifica!on by LIFE home integra!on.
Transla!on into other languages (of the manual) is strictly forbidden without previous wri"en authorisa!on from and subsequent verifica!on by LIFE
Home Integra!on.
All rights on this document are reserved.
LIFE home integra!on will not accept responsibility for damage or malfunc!ons caused by incorrect installa!on or improper use of products and
Users are therefore recommended to read this manual carefully LIFE home integra!on will not accept responsibilit y for damage or malfunc!ons caused
by the use of the automa!on together with the devices of otrer manufacturers; such ac! on will render the warranty void.
LIFE home integra!on will not accept responsibility for damage or injury caused by non-compliance with the installa!on, set up, maintenance and use
indica!ons contained in this manual and the safety instruc!ons described in the SAFETY INSTRUCTIONS AND WARNINGS chapter.
With the aim of improving its products, LIFE home integra!on reserves the right to bring about altera!ons to them at any !me, without giving
prior no!ce.
His document conforms to the state of the automa!on which it is provided for sale.
9.1 - Informa!on on the manufacturer
LIFE home integra!on is the manufacturer of the motor DEUS and the owner of all rights concerning this document.
• Manufacturer: LIFE Home Integra!on
• Address: Via Sandro Per!ni, 3/5 - 31014 Colle Umberto (TV) Italia
• Telephone: + 39 0438 388592
• Fax: + 39 0438 388593
• h"p: www.homelife.it
• e-mail : info@homelife.it
The iden!ty plate bearing the informa!on on the Manufacturer is fixed to the electromechanical operator.
The plate specifies the type and date (month/year) of manufacture of the product.
For further informa!on on technical and/or commercial issues and technician call-out and spares requests, Customer may contact the Manufacturer
or area representa!ve from which the product was purchased.
9.2 - Intended use
• The electromechanical operator DEUS has been exclusively designed to sliding gates.
Any usage differing from that described above is forbidden .
• The electromechanical operator may only be used with other LIFE products.
• The manufacturer declines all responsibility for damage caused by improper use. All risks are the fi"er's responsibility and the warranty shall be
rendered void .
• The electromechanical operator may not be installed or used in poten!ally explosive environments.
• The metal gate must be installed conform to current European standards and Direc!ves.
• The electromechanical operator may only be used when in perfect working order and in compliance with the intend use, in the awareness of safety
and hazard condi!ons and in compliance with the instruc!ons for installa!on and use.
• Any dysfunc!ons that may pose threats to safety must be eliminated immediately .
• The electromechanical operator may not be used in environments prone to flooding.
• Do not use the operator in environmental condi!ons characterised by harsh atmospheric agents (e.g. salty air).
10 - SAFETY INSTRUCTIONS AND WARNINGS
10.1 - General instruc!ons and warnings
• This manual is designed for PROFESSIONAL FITTERS only. Installa!on of the control unit requi res prac!cal and theore!cal knowledge of
mechanics, electrics and electronics as well as current sector legisla!on and regula!ons.
• Once the electromechanical operator has been installed, it is forbidden for users to perform any opera!on on the control unit this instruc!on
manual, which, as men!oned previously, are intended for use by qualified personnel only.
• Fi"ers must operate in compliance with the laws direc!ves.
He/she must also make constant reference to harmonised standards EN 12453 and EN 12445.
• Indica!ons given in this manual must always be observed when installing, connec!ng, adjus!ng, tes!ng and se&ng the control unit. The Manuf
acturer declines all responsibility for damage or injury caused by non-observance of the instruc!ons contained in this manual.
• The Manufacturer declines all responsability if the fi"er doesn't take care about over men!oned.
• Keep this manual in a safe and easily accessible place so that it can be consulted rapidly when necessary.
• During installa!on, connec!on, trial run and usage of the control unit, observe all applicable accident preven!on and safety regula!ons.
• For safety and op!mal func!on of the control unit, use only original spares, accessories, devices and fastening apparatus.
• Do not perform altera!ons on any control unit device or component. This opera!on may cause malfunc!ons, and put the products out of
manufacturer responsability
• If liquids contacts the control unit, disconnect the electricity supply and contact the Manufacturer's Assistance Service immediately;
Infact this situa!on maybe very dangerous for user.
• In the event of long periods of inac!vity, in order to prevent the leakage of harmful substances from the ba"ery.
• If faults or problems that cannot be resolved using the informa!on contained in this manual, contact the Manufacturer's assistance service.
• The Manufacturer declines all responsibility for damage to electromechanical operator func!oning caused by non-compliance to the storage
instruc!ons given below.
• The electromechanical operator must be stored in closed, dry places, at room temperatures between -20 and +70'C and raised off the ground.
• Keep the electromechanical operator away from sources of heat and flames, that maybe cause malfunc!ons, fires or hazard situa!ons.
To Next Page
Loading...