To Next PageTo Next Page
Need help?Do you have a question about the Deus CT1 24 and is the answer not in the manual?
Details dimensions and operational constraints for the gearmotor.
Guidance on positioning and mounting gearmotor components.
Instructions for correctly installing and securing the anchoring plate.
Procedures for mounting the gearmotor onto the anchoring plate.
Steps for attaching and aligning the rack to the gate.
How to manually disengage the gearmotor for gate operation.
Guidelines for electrical wiring and connecting components.
How to correctly route and insert electric cables into the gearmotor.
Details on wiring the control unit for automation.
Explains the terminal connections for the control unit.
Visual guide to the electrical connections of the control unit.
Procedure to restore factory default settings for the control unit.
Guide for the initial automatic setup and calibration of the gate.
How to program a remote control for full gate opening.
Programming remotes for partial or pedestrian gate access.
Programming remotes to activate a relay contact function.
Methods for programming radio-controlled transmitters.
Procedures for deleting programmed remote transmitters.
Details about the manufacturer, LIFE Home Integration.
Specifies the correct and forbidden uses of the operator.
Overarching safety guidelines for installation and use.
Specific safety precautions to be followed during installation.
Procedures for testing the automation after installation.
Steps and requirements for the initial use of the gate automation.
Safety guidelines and warnings for operating the automation.
Warnings and instructions for performing maintenance tasks.
Recommended schedule and procedures for routine maintenance.
General