P.3
GENERAL INDEX
1 - TECHNICAL DATA OF THE ENGINE --------------------------------------------------------------------------------------- P. 4
1.1 - Dimensions and limits of use
2 - INSTALLATION ---------------------------------------------------------------------------------------------------------------- P. 5
2.1 - Installa!on of the gearmotor components
2.2 - Installa!on and fixing of the anchoring plate
2.3 - Installa!on and fixing of the gearmotor
2.4 - Rack moun!ng
2.5 - Manual release
2.6 - Wiring and connec!ons
2.7 - Inser!on of electric cables in the gearmotor
3 - ELECTRONIC CONTROL UNIT CONNECTIONS ------------------------------------------------------------------------ P. 9
3.1 - Wiring and connec!ons
3.2 - Control unit connec!ons
3.3 - Electrical connec!on
4 - CONTROL UNIT CONFIGURATION -------------------------------------------------------------------------------------- P.12
4.1 - Reset default parameters
4.2 - Automa!c ini!al setup
5 - REMOTE CONTROL SETTINGS ------------------------------------------------------------------------------------------- P.13
5.1 - Total opening remote learning
5.2 - Par!al/Pedestrian opening remote learning
5.3 - Remote control learning on Relay contact
5.4 - Remote control learning via radio
5.5 - Remove one transmi#er, all transmi#ers
6 - SETTINGS ---------------------------------------------------------------------------------------------------------------------- P.15
7 - VISUALIZATION OF THE INPUT STATUS VIA DISPLAY --------------------------------------------------------------- P.17
8 - CONNECTION WITH EMERGENCY BATTERIES ----------------------------------------------------------------------- P.18
9 - GENERAL INFORMATION -------------------------------------------------------------------------------------------------- P.19
9.1 - Manufacturer's data
9.2 - Intended use
10 - SAFETY INSTRUCTIONS AND WARNINGS ---------------------------------------------------------------------------- P.19
10.1 - Prescrip!ons and general warnings
11 - INSTALLATION WARNINGS ---------------------------------------------------------------------------------------------- P.20
11.1 - Prescrip!ons and warnings for installa!on
12 - TESTING AND COMMISSIONING -------------------------------------------------------------------------------------- P.20
12.1 - Tes!ng
12.2 - Commissioning
13 - SAFETY INSTRUCTIONS AND WARNINGS --------------------------------------------------------------------------- P.21
13.1 - Prescrip!ons and warnings for use
14 - MAINTENANCE ------------------------------------------------------------------------------------------------------------ P.22
14.1 - Requirements and warnings for maintenance
14.2 - Ordinary maintenance
15 - DEMOLITION AND DISPOSAL ------------------------------------------------------------------------------------------ P.22
To Next Page
Loading...