EasyManua.ls Logo

Deutronic DBL - Page 11

Deutronic DBL
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Deutronic DBL Manual (MPC4) - 14VDC - EN - 11 / 20 - 10 / 2006
Parameter Value Setting range / Information
Max. battery
charge capacity
(in Ampere hours)
Q
max
0 to 6000 Ah (Q
max
= typ. 250 Ah)
SAFETY FUNCTION - stops charging!
Hint for a full charge of the battery:
Adjust the limit for battery charging capacity in the setup more then about
20% higher as the nominal value given by the battery manufacturer
Min. charging
time
T
min
0 to 240 Minutes (T
min
= typ. 15 min)
Time interval after which the charger is allowed to switch back to trickle
charge
Max. charging
time
T
max
0,1 to 99 Hours (T
max
= typ. 24 hours)
SAFETY FUNCTION - stops charging!
Parameter Value Setting range / Information
FEATURES: BVL: ON / OFF
Signal ‘battery full’ activated / deactivated
Ibvl
Current limit, at which the signal ‘battery full’ is indicated via LED or via a
connected external signal lamp (Ibvl = typ. 12,0 A)
Note: Signalization of ‘battery full’ state is independent from any trickle
current limit
SHORTCELL:
DETECT ON /
OFF
Definition / explanation – see 7) Annex – CELLCHECK / SHORT CELL
DETECT

Related product manuals