Deutz TCD 2013 2V - Page 321

© 02/2010 OBJ_DOKU-21794-001.fm
2/2
6
Fuel pipes
TCD 2013 2VW 21-02-05
● Visually check the thread and the sealing
edge (arrows)of the rail pressure sensor.
Attention!
Do not touch the pin contacts of the rail
pressure sensor with your hands to avoid
electrostatic discharging.
Ensure absolute cleanliness of the connec
-
tor.
© 43017-0
Installing the rail pressure sensor
● Coat the thread and sealing edge of the rail pressure
sensor lightly with assembly grease.
● Screw in rail pressure sensor (2).
● Tighten rail pressure sensor.
M18x1.5
 70 Nm
● Plug in the cable plug (1).
Attention!
No foreign bodies may get into the rail.
Ensure utmost cleanliness. Especially on
the thread and the sealing surface of the
rail.
Ensure that the connection is perfect.
1
2
© 43977-0