Deutz TCD 2013 2V - Page 66

© 02/2010 OBJ_DOKU-21746-001.fm
3/4
6
Front cover
TCD 2013 2V W 01-02-02
Removing the shaft sleeve
● Remove the crankshaft sealing ring.
 W 01-02-01
● Remove oil suction pipe
 W 16-01-01
© 39871-0
● Unscrew screws (1).
● Remove front cover.
1
1
1
1
1
© 44542-0
● Place two mounting levers on the gate of the front
cover (arrows).
Attention!
Do not damage the sealing surfaces.
© 39873-0