Binding with staples and punching holes in copies
3
3-22 ineo 223/283/363/423
3.9
3.9 Binding with staples and punching holes in copies
Staple/Punch
Multi-page documents can be copied and stapled together. Settings can be specified to staple the document
in the corner or at two locations. The Staple settings are available only if the optional finisher is installed.
Holes for filing can be punched in the copies. The Punch settings are available only if the optional punch kit
and finisher FS-527 are installed.
Punch
Staple [Corner]
Staple [2-Position]
To Next Page
Loading...