Do not place the thermostat on the inner side of
an exterior wall.
Always install the thermostat at least 50 cm from
windows and doors.
Do not place the thermostat in a way that it will be
exposed to direct sunlight.
Note: A floor sensor enables a more accurate tem-
perature control and is recommended in all floor
heating applications and mandatory under wood-
en floors to reduce the risk of over-heating the
floor.
▪
Place the floor sensor in a conduit in an appropriate
place where it is not exposed to sunlight or draft from
door openings.
▪
Equally distant and >2cm from two heating cables.
DEVIreg™ 132
Installation Guide 7
To Next Page
Loading...
