EasyManua.ls Logo

DeVilbiss XR2500 - To Use Wand; Changing Nozzles

DeVilbiss XR2500
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12- ENG
D28803
TO USE WAND
Your pressure washer is equipped with up to five spray nozzles. Each nozzle is
color coded and delivers a specific spray pattern for a particular cleaning
purpose. The size of the nozzle determines the size of the fan spray and the
pressure out of the nozzle. The 0º, 15º, 25º, and 40º nozzles are high pressure
nozzles. The chemical nozzle is a low pressure nozzle.
The nozzles are housed in receptacles on the panel of the pressure washer
handle. Colors on the panel identify nozzle location and spray pattern.
Risk of injection or injury to person. Do not direct discharge
stream toward persons, unprotected skin, eyes, or any pets
or animals. Serious injury can occur.
Changing Nozzles
DO NOT attempt to change nozzles
while pressure washer is running.
Turn engine off before changing nozzles.
1. Pull quick connect coupler back and insert nozzle.
2. Release quick connect coupler and twist nozzle to
make sure it is secure in coupler.
Risk Of Injury. Ensure nozzle is
completely inserted in QC socket, and
QC snap ring is fully engaged (forward) before squeezing gun trigger.
0º nozzle - Red. This nozzle delivers a pinpoint
stream and is extremely powerful. It covers a very
small area of cleaning. This nozzle should only be
used on surfaces that can withstand this high
pressure such as metal or concrete. Do not use on
wood.
15º nozzle - Yellow. This nozzle delivers a powerful
15 degree spray pattern for intense cleaning of small
areas. This nozzle should only be used on areas that
can withstand the high pressure from this nozzle.
25º nozzle - Green. This nozzle delivers a 25
degree spray pattern for intense cleaning of larger
areas. This nozzle should only be used on areas that
can withstand the pressure from this nozzle.
40º nozzle - White. This nozzle delivers a 40 degree
spray pattern and a less powerful stream of water. It
covers a wide area of cleaning. This nozzle should
be used for most general cleaning jobs.
Chemical nozzle - Black (not shown). This nozzle is
used to apply chemicals or cleaning solutions. It has
the least powerful stream.

Related product manuals