to 80%RH , and 5%RH for one step. The humidity setting will cycle like below :
30%RH- 35%RH - 40%RH - 45%RH - 50%RH - 55%RH- 60%RH - 65%RH
-70%RH - 75%RH- 80%RH-30%RH
The humidity setting function is effective under Common mode, and ineffective
under continuously dehumidify mode and sleeping mode . You can not set
humidity data under continuously dehumidify mode and sleeping mode .
Long press humidity setting button for 3 seconds , the display screen will show
the current room temperature.
Fan Speed button
The machine has two fan speed : High fan speed and low fan speed. Press
this button to switch the fan speed between high fan speed and low fan speed ,
and then the corresponding indicator light will be on.
Fan speed setting function is just effective only under common mode ,and
ineffective under continuously dehumidify mode and sleeping mode . You just
can set fan speed under common mode.
Child-lock button
Long press the child-lock button for 3 seconds to turn on the child-lock
function , the child- lock indicator light will be on ,and you can not operate any
other button under child-lock status .
Press this button again for 3 seconds to turn off the child-lock function, the
child-lock indicator light will be off
Three colors indication function
When the room humidity< 45%RH ,the indicator light will show blue color
When 45%RH≤ room humidity≤65%RH,the indicator light will show green color
When the room humidity>65%RH, the indicator light will show red color
Water Tank Full Indicator
When the water tank is full for 5 seconds, the water tank indicator light will be
on ( turns red color) and the machine will buzze for 5 times to alarm to remind
To Next Page
Loading...
