What to do if my DEVOLA DV20LWF Dehumidifier is not operating?
If your DEVOLA Dehumidifier isn't turning on, first, ensure the power cord is securely inserted into the wall outlet. Next, check if the water level indicator is illuminated, indicating a full tank; if so, empty the water tank and reinstall it correctly. Finally, confirm that the room temperature is within the operating range of 5-35?.
Why is my DEVOLA DV20LWF leaking water?
If you notice water leakage from your DEVOLA Dehumidifier, it could be due to an overflow while moving the unit. Make sure to empty the water tank before transporting it. Also, check the drain hose for any kinks or bends and straighten the hose to ensure proper drainage.
Why is my DEVOLA Dehumidifier not collecting water?
If your DEVOLA Dehumidifier isn't collecting much water, start by checking the air filter for dirt and clean it if necessary. Also, ensure that the air duct isn't blocked by any obstacles. If the room temperature is below 20?, this is normal due to low humidity. Finally, verify that the set humidity level is below the current humidity value; if not, adjust it accordingly.
How to reduce noise from my DEVOLA Dehumidifier?
If your DEVOLA Dehumidifier is making excessive noise, ensure that the unit is placed on a horizontal, firm, and flat surface. Check for any loose or vibrating parts and secure them. If the noise sounds like water flowing, this is normal and comes from the refrigerant.
What does error code E2 mean on my DEVOLA Dehumidifier?
If your DEVOLA Dehumidifier displays error code E2, it indicates that the humidity sensor is either dampened or has failed. Try cleaning the humidity sensor, and if the problem persists, replace it.
What does error code CL mean on my DEVOLA DV20LWF Dehumidifier?
If your DEVOLA Dehumidifier displays error code CL, it means the room temperature is below 5°C (41°F). This is normal operation; the compressor will stop, but the fan will continue running.
What does error code CH mean on my DEVOLA DV20LWF Dehumidifier?
If your DEVOLA Dehumidifier displays error code CH, it indicates that the room temperature is above 38? (100°F). This is normal; the compressor stops, but the fan keeps running.
What does error code LO mean on my DEVOLA DV20LWF Dehumidifier?
If your DEVOLA Dehumidifier displays error code LO, it means the room relative humidity is below 20%RH. This is normal operation; the compressor stops, and the fan continues running.
What does error code HI mean on my DEVOLA Dehumidifier?
If your DEVOLA Dehumidifier displays error code HI, it indicates that the room relative humidity is above 90%RH. This is normal operation; the compressor and the fan keep running.
Highlights R290 properties and critical safety measures due to its flammability.
Explains R290 flammability, lack of odor, and procedures for suspected leaks.
Lists essential precautions to reduce risks of fire, electric shock, or injury during operation.
Specifies required certification for personnel working on refrigerant circuits.
Emphasizes manufacturer recommendations and outlines controlled work procedures.
Outlines general work area safety, including instruction and confinement precautions.
Details checking for flammable atmospheres using appropriate leak detection equipment.
Requires fire extinguishers and prohibition of ignition sources during hot work.
Stresses adequate ventilation and checks for refrigeration equipment, charge size, and markings.
Covers safety checks for electrical components: capacitors, wiring, and earth bonding.
Guidance on selecting a suitable location, including clearance and surface requirements.
Lists locations to avoid: heat sources, water splashes, direct sunlight, poor ventilation.
Warns about room size requirements and avoiding areas with potential flammable gas leaks.
Details importance, frequency, and method for cleaning the air filter to maintain efficiency.
Checks for power, water level, temperature, and air filter when the unit is unresponsive.
Offers solutions for water leakage, including drain hose kinks and unit positioning.
Lists common error codes (E2, CL, CH, LO, HI) and their meanings or normal status.
This document serves as the instruction manual for Devola dehumidifiers, specifically models DV16L/DV16LWF and DV20L/DV20LWF. The device is designed to remove excessive moisture from the air, thereby reducing relative humidity and protecting buildings and their contents from the adverse effects of excess humidity. It utilizes R290 (propane) as a refrigerant, which is environmentally friendly with no damaging influence on the ozone layer (ODP) and a negligible greenhouse effect (GWP). Due to the flammability of R290, special precautions are outlined for its use and servicing.
The Devola dehumidifier operates by drawing in moist air, passing it over a cooling coil where moisture condenses, and then releasing drier air back into the room. The collected water is stored in a water tank or can be continuously drained via a hose. The unit features a digital display that indicates ambient humidity using a three-color system: blue for humidity below 45%, green for humidity between 45% and 65%, and red for humidity above 65%.
General| Brand | DEVOLA |
|---|---|
| Model | DV20LWF |
| Category | Dehumidifier |
| Language | English |
To Next Page
