36
ENGLISH
FLIP-OVER SAW D27107
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough product
development and innovation make DEWALT one of the most reliable
partners for professional power tool users.
Technical data
D27107
Voltage V 230
Power input W 2,000
Power output W 1,700
Max. blade speed min
-1
4,000
Blade diameter mm 300 - 305
Blade bore mm 30
Blade body thickness mm 2.1 - 2.2
Riving knife thickness mm 2.5
Automatic blade brake time s < 10
Weight kg 42
Cutting capacities
Mitre saw mode
Mitre (max. positions) left 48°
right 48°
Bevel (max. positions) left 48°
right 2°
Max. crosscut capacity at 90° mm 205
Max. mitre cut capacity at 45° mm 160
Max. depth of cut 90° mm 155
Max. depth of bevel cut 45° mm 110
Max. depth of cut at 45° bevel, 45° mitre mm 100
Saw bench mode
Max. ripping capacity left/right mm 120/320
Depth of cut at 90° mm 81
Depth of cut at 45° mm 56
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or damage to the
tool in case of non-observance of the instructions in this
manual.
Denotes risk of electric shock.
Sharp edges.
EC-Declaration of conformity
D27107
DEWALT declares that these power tools have been designed in
compliance with: 98/37/EEC, 89/336/EEC, 73/23/EEC, EN 61029-1,
EN 61029-2-11, EN 55014, EN 55014-2, EN 61000-3-2 & EN 61000-3-3.
For more information, please contact D
EWALT at the address below or
refer to the back of the manual.
Level of sound pressure according to 86/188/EEC & 98/37/EEC,
measured according to EN 61029-2-11:
D27107
L
pA
(sound pressure) dB(A)* 91,5
L
WA
(acoustic power) dB(A) 102,5
* at the operator’s ear
K
pA
(sound pressure uncertainty) dB(A) 3
K
WA
(acoustic power uncertainty) dB(A) 3
Take appropriate measures for the protection of hearing.
Weighted root mean square acceleration value according to EN 61029-2-11:
D27107
< 2,5 m/s
2
*
* measurement uncertainty according to EN 12096: 1.1 m/s
2
Director Engineering and Product Development
Horst Großmann
DEWALT, Richard-Klinger-Straße 11
D-65510, Idstein, Germany
To Next Page
Loading...
