45
ENGLISH
The castor wheels provide an easier transport of the machine.
• Fold the rear legs into the base.
• Fold the front legs out of the base.
• Lift the machine by the legs.
When carrying the machine, always seek assistance.
The machine is too heavy for one person to handle.
Maintenance
Your DEWALT power tool has been designed to operate over a long period
of time with a minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Lubrication
The bearings of the motor are pre-lubricated and watertight.
• Slightly oil the rotating table bearing surface where it slides on the lip of
the fi xed table at regular intervals.
• Periodically lubricate the depth of cut screwthread.
• Clean the parts subject to accumulation of sawdust and chips
periodically with a dry brush.
Cam adjustment (fi g Z1 - Z3)
To take out the clearance between the two tables, proceed as follows:
• Rotate the machine into saw bench mode.
• Remove the screws (138) and the retainer plate (139).
• Loosen the screw (140) of the adjustment cam (141).
• Rotate the adjustment cam using a pair of needle nose pliers.
• Hold the adjustment cam with the pliers and tighten the screw.
• Replace the retainer plate and tighten the screws.
• Rotate the machine into mitre saw mode. Check the force that is
needed to mitre the saw. Repeat the above steps if the force needed is
too high.
Protecting the environment
Separate collection. This product must not be disposed of with
normal household waste.
Should you fi nd one day that your DEWALT product needs replacement, or
if it is of no further use to you, do not dispose of it with household waste.
Make this product available for separate collection.
Separate collection of used products and packaging allows
materials to be recycled and used again. Re-use of recycled
materials helps prevent environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate collection of electrical products
from the household, at municipal waste sites or by the retailer when you
purchase a new product.
D
EWALT provides a facility for the collection and recycling of DEWALT
products once they have reached the end of their working life. To take
advantage of this service please return your product to any authorised
repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair agent by
contacting your local D
EWALT offi ce at the address indicated in this
manual. Alternatively, a list of authorised DEWALT repair agents and full
details of our after-sales service and contacts are available on the Internet
at: www.2helpU.com
GUARANTEE
• 30 DAY NO RISK SATISFACTION GUARANTEE •
If you are not completely satisfi ed with the performance of your
D
EWALT machine, simply return it within 30 days, complete as
purchased, to the point of purchase, for a full refund or exchange.
Proof of purchase must be produced.
• ONE YEAR FREE SERVICE CONTRACT •
If you need maintenance or service for your DEWALT machine, in the
12 months following purchase, it will be undertaken free of charge
at an authorized D
EWALT repair agent. Proof of purchase must be
produced. Includes labour and spare parts for Power Tools.
Excludes accessories.
• ONE YEAR WARRANTY •
If your DEWALT product becomes defective due to faulty materials
or workmanship within 12 months from the date of purchase, we
guarantee to replace all defective parts free of charge or, at our
discretion,
replace the unit free of charge provided that:
• The product has not been misused.
• Repairs have not been attempted by unauthorized persons.
• Proof of purchase date is produced.
This guarantee is offered as an extra benefi t and is additional to
consumers statutory rights.
For the location of your nearest authorized DEWALT repair agent,
please use the appropriate telephone number on the back of this
manual. Alternatively, a list of authorized DEWALT repair agents and
full details on our after-sales service are available on the Internet at
www.2helpU.com
To Next Page
Loading...
