• ElectricalGrounding:
Failuretoprovideadequate
groundingtothisproduct
couldresultinseriousinjury
ordeathfromelectrocution.
SeeGrounding
Instructionsunder
Installation.
• Make certain that the
electrical circuit to which the
compressor is connected
provides proper electrical
grounding, correct voltage and
adequate fuse protection.
_kWARNING: RISK FROM FLYING OBJECTS
WHAT CAN HAPPEN HOWTO PREVENT IT
• The compressed air stream • Always wear certified safety
can cause soft tissue equipment: ANSI Z87.1 eye
damage to exposed skin and protection (CAN/CSA Z94.3)
can propel dirt, chips, loose with side shields when using
particles, and small objects the compressor.
at high speed, resulting in ,, Never point any nozzle or
property damage or personal sprayer toward any part of
injury, the boay or at other people or
animals.
- Always turn the compressor off
and bleed pressure from the
air hose and air tank before
attempting maintenance.
attaching tools or accessories.
WARNING: RISK OF HOT SURFACES
WHAT CAN HAPPEN HOW TO PREVENT IT
Touching exposed metal such
as the compressor head,
engine head, engine exhaust
or outlet tubes, can result in
serious burns.
• Never touch any exposed
metal parts on compressor
during or immediately after
operation. Compressor will
remain hot for several minutes
after operation.
• Do not reach around
protective shrouds or attempt
maintenance until unit has
been allowed to cool.
WARNING: RISK FROM MOVING PARTS
WHAT CAN HAPPEN HOWTO PREVENT IT
,, Moving parts such as the ,, Never operate the compressor
pulley,flywheel, and belt can with guards or covers which
cause serious _njuryif they are damaged or removed.
come into contact with you or ,, Keep your hair, clothing, and
your clothing, gloves away from moving parts.
Loose clothes, jewelry, or long
hair can be caught in moving
parts.
= Air vents may cover moving
parts and should be avoided as
well.
To Next Page
Loading...
Need help?
General
