To Next PageTo Next PageWhat to do if the pressure gauge drops when using an accessory with my DeWalt D55168 Air Compressor?
If the pressure reading on the regulated pressure gauge drops when an accessory is used with your DeWalt Air Compressor, it might be due to loose tube fittings. Tighten the fittings where you hear air escaping, and check them using a soapy water solution. Be careful not to overtighten the fittings.
Why does the safety valve pop off on my DeWalt D55168 Air Compressor?
If the safety valve on your DeWalt Air Compressor pops off due to excessive air tank pressure, it could be because the pressure switch isn't shutting off the motor when the compressor reaches its cut-out pressure, or the pressure switch cut-out is set too high. Set the On/Off switch to OFF, if the unit does not shut off contact a DEWALT factory service center or a DEWALT authorized service center.
General| Quantity per pack | 1 pc(s) |
|---|
General safety advice, including reading the manual and awareness of chemical hazards.
Hazards related to sparks and flammable vapors, with prevention measures.
Hazards of inhaling compressed air or chemical dust/vapors, and protective measures.
Risks associated with air tank integrity, corrosion, and modifications, with preventative actions.
Hazards of electric shock from the compressor and precautions for safe operation.
Hazards from compressed air streams propelling objects and necessary safety equipment.
Hazards of burns from hot compressor parts and precautions for handling.
Hazards from moving components like pulleys and belts, and protective measures.
Risks related to fatigue, distractions, and missing parts during operation.
Importance and procedure for grounding the air compressor to prevent electrical shock.
Overview of common malfunctions, their causes, and corrective actions.
