ENGLISH
3
• Do not operate inflator in explosive atmospheres, such
as in the presence of flammable liquids, gases or dust.
Inflator creates sparks which may ignite the dust orfumes.
• Keep children and bystanders away while operating an
inflator. Distractions can cause you to losecontrol.
• When operating the inflator, the inflator must be placed
on a stable surface. Since the vibration produced by the
inflator may cause it to "walk," do not operate on a high shelf
or other surface. Operate at ground or bench levelonly.
Electrical Safety
• Inflator plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with
earthed (grounded) inflators. Unmodified plugs and
matching outlets will reduce risk of electricshock.
• Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed
orgrounded.
• Do not expose inflator/external power supply to rain or
wet conditions. Water entering an inflator/external power
supply will increase the risk of electricshock.
• Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the inflator/external power
supply. Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the risk
of electricshock.
• If operating an inflator/external power supply in a damp
location is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces the risk of
electricshock.
• To prevent hazards, leave the replacement of damaged
power cables strictly to the manufacturer or a qualified
electrician. There is a risk of electric shock!
Personal Safety
• Stay alert, watch what you are doing and use common
sense when operating an inflator. Do not use an inflator
while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
operating an inflator may result in serious personalinjury.
• Always wear ear protection when operating theinflator.
• Safety goggles should be worn when using the inflator
in order to protect the eyes against any foreign bodies
lifted by the jet ofair.
• Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be caught in
movingparts.
• Do not open the body casing. There are no user
serviceable partsinside.
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough
product development and innovation make DEWALT one of the
most reliable partners for professional power toolusers.
Technical Data
DCC018
Input (battery pack) V
DC
18
AC adapter/12V DC connector V
DC
12–13.8
Type 1
Battery type Li-Ion
Max. power input (external power supply) W 150
Pressure (max) bar (kPa) 11 (1100)
Operating temperature range -18 / +40 ˚C
Weight (without battery pack) kg 2.5
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.
Denotes risk of electricshock.
Denotes risk offire.
General Safety Warnings
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
seriousinjury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
Work Area Safety
• Keep work area clean and well lit. Cluttered or dark areas
inviteaccidents.
INFLATOR
DCC018
To Next Page
Loading...
Need help?
General
