DeWalt DCF6202 - Product Information and Safety; Congratulations and Technical Data; Safety Guidelines and Warnings; Package Contents

ENGLISH
3
Package Contents
The package contains:
1 Collated magazine attachment
1 PR2 collated screwdriver bit
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred duringtransport.
• Take the time to thoroughly read and understand this manual
prior tooperation.

WARNING: We recommend the use of a residual current
device with a residual current rating of 30mA or less.
Residual Risks
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual risks
cannot be avoided. These are:
• Impairment ofhearing.
• Risk of personal injury due to flyingparticles.
• Risk of burns due to accessories becoming hot
duringoperation.
• Risk of personal injury due to prolongeduse.
SAVE THESE INSTRUCTIONS
General Power Tool Safety Warnings

WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or seriousinjury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
Additional Specific Safety Rules for Collated
Magazine Attachment
• The collated magazine is to only be used with the DeWALT
DCF620screwdriver.
• Observe all operating instructions and safety regulations
contained in the manual for the screwdriver the magazine
accessory is usedwith.
• Before use, ensure that the magazine accessory is properly
attached to thetool.
• Avoid body contact with earthed or grounded surfaces such as
pipes, radiators, ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed orgrounded.
• Disconnect the battery pack from the power tool before
making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk of
starting the power toolaccidentally.
• When driving screws, never reach into the magazine
accessory. Keep hands clear of the advancing mechanism and
the spot where the screw is beingdriven.
• Do not use the magazine accessory as a grippingsurface.
• Hold power tool by insulated gripping surfaces, when
performing an operation where the fastener may contact
hidden wiring. Fasteners contacting a “live” wire may make
exposed metal parts of the power tool “live” and could give the
operator an electricshock.
• Use only screw strips that are suitable to this magazine. Only
insert screw strips when the battery is disconnected from the
screwdriver and the trigger islocked.
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.

Denotes risk of electricshock.

Denotes risk offire.
DCF6202
Screw length suitability mm 25–57
Weight kg 0.36
English (original instructions)
Congratulations!
You have chosen a DeWALTSTANLEY FATMAX tool. Years of
experience, thorough product development and innovation
make DeWALTSTANLEYFATMAX one of the most reliable
partners for professional power toolusers.
Technical Data
COLLATED MAGAZINE ATTACHMENT
DCF6202