10
ENGLISH
Assembling Pole Saw Attachment to the
Powerhead (Fig. B)
WARNING: Sharp moving blade. To prevent accidental
operation, insure that battery is disconnected from the
handle and that the protective scabbard is in place on the
chain before performing the following operations. Failure
to do this could result in serious personal injury.
Powerhead (Fig. B)
( sold separately)
WARNING: To reduce risk of injury:
• Before any use, be sure everyone using this product
reads and understands all safety instructions and
other information contained in the powerhead and
attachmentmanuals.
• Never apply power without an attachment being
properly mounted to thepowerhead.
WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start‑up can causeinjury.
Your attachment is designed such that the powerhead can
separate from the pole saw attachment by turning the knob
6
counterclockwise, depressing the latching button
18
and
gently pulling them apart by their poles
1
,
17
.
This should only be done with the power switch off and the
battery pack removed. Inside the upper powerhead pole
17
is a mechanical coupling that will spin if the powerhead is
turned on. This coupling can cause injury if contacted while the
powerhead isoperating.
NOTE: Ensure the attachment is fully engaged and the knob is
fully tightened before operating. Check for proper engagement
and tightness duringuse.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start‑up can causeinjury.
WARNING: Use only DeWALT battery packs andchargers.
DO NOT use under wet conditions or in the presence of
flammable liquids orgases.
DO NOT let children come into contact with the tool. Supervision
is required when inexperienced operators use thistool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
withoutsupervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with thisproduct.
Description (Fig. A)
WARNING: Never modify the tool. Damage or personal
injury couldresult.
1
Pole saw attachment
2
Sprocket cover
3
Bar lock nut (x2)
4
Oil cap
5
Branch removal hook
6
Guide bar
7
Saw chain
8
Chain tensioning screw
9
Oil reservoir
10
Oil adjustment screw
11
Extension pole
12
Extension pole coupler
13
Knob
Intended Use
Your pole saw attachment has been designed to be used with
your powerhead. This pole saw is ideal for pruning applications
and cutting limbs up to 150mm indiameter.
Date Code Position (Fig.B)
The date code
13
, which also includes the year of manufacture,
is printed into thehousing.
Example:
2021XX XX
Year and week of Manufacture
A
Hot surface. Do nottouch.
Wear protectivefootwear.
Rotational direction of the sawchain.
Contact of the guide bar tip with any object should
beavoided.
Electrocution hazard. Keep at least 10m away from
overheadlines.
Switch the tool off. Before performing any maintenance
on the tool, remove the battery from thetool.
Always use two hands when operating thechainsaw.
Directive 2000/14/EC guaranteed soundpower.
Beware of fallingobjects.
Keep bystandersaway.