DeWalt DCMASPS5 User Manual

4
ENGLISH
a
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.

Denotes risk of electricshock.
EC-Declaration of Conformity
Machinery Directive
Pole Saw
DCMASPS5
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2015; EN ISO 11680-1:2011,
2000/14/EC, Annex V DEKRA Certification B.V., Meander
1051 / P.O. Box 5185 6825 MJ ARNHEM / 6802 ED ARNHEM
Netherlands
Notified Body ID No.: 0344
LPA (measured sound pressure level) 84 dB(A)
LWA (guaranteed sound power) 102 dB(A)
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DeWALTat
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofDeWALT
Markus Rompel
Vice-President Engineering, PTE-Europe
DeWALT, Richard-Klinger-Straße 11,
65510, Idstein, Germany
31.12.2020
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of workpatterns.
DCMASPS5
Voltage V
DC
54
Battery type Li‑Ion
Bar Length mm 203
Maximum Chain Speed (no‑load) m/s 6.5
Maximum Cutting Length cm 15
Oil Capacity ml 200
Weight kg 2.7
Noise values and vibration values (triax vector sum)
according to EN62841‑1
L
PA
(emission sound pressure level) dB(A) 84
K (uncertainty for the given sound pressure) dB(A) 2.5
L
WA
(sound power level) dB(A) 99
K (uncertainty for the given sound level) dB(A) 3
Vibration emission value a
h
= m/s
2
<2.5
Uncertainty K = m/s
2
1.5
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
English (original instructions)
POLE SAW
DCMASPS5

DeWalt DCMASPS5 Specifications

General

Brand	DeWalt
Model	DCMASPS5
Category	Chainsaw
Language	English