Need help?Do you have a question about the DeWalt DCS365 and is the answer not in the manual?
General| Power Source | Cordless |
|---|---|
| Voltage | 18V |
| Blade Diameter | 184 mm |
| Weight | 11.5 kg |
| Max. Cutting Depth at 90° | 50 mm |
| No Load Speed | 3750 rpm |
| Blade Bore | 16 mm |
| Motor Type | Brushed |
| Max Cutting Depth at 45° | 50 mm |
| Max Cutting Capacity (90 degrees) | 250 mm |
Explains signal words like DANGER, WARNING, CAUTION, NOTICE for hazard identification.
Covers Work Area, Electrical, and Personal Safety guidelines for power tools.
Covers safe operation, blade handling, and workpiece support for mitre saws.
Details electrical safety, extension cables, and battery charger instructions.
Essential warnings for operating the mitre saw safely and correctly.
Lists residual risks like touching rotating parts, hearing impairment, and dust hazards.
Explains charger operation, protection systems, wall mounting, and cleaning.
Crucial safety guidelines for handling and using DEWALT battery packs.
Details package contents, tool markings, and date code position.
Lists and describes the main parts of the mitre saw as shown in Figure A.
Guides battery insertion, fuel gauge, and saw familiarization.
Covers blade changes, saw transport, mounting, and storage.
Explains XPS light, mitre, bevel, and rail lock knobs.
Covers instructions, body position, trigger, dust extraction, and general cutting advice.
Details crosscuts, mitre cuts, bevel cuts, and quality of cut factors.
Methods for securely clamping workpieces for safe cutting.
Guides mitre scale, bevel stop, guard, and rail adjustments.
Techniques for cutting frames, molding, and compound mitres.
Instructions for installing and using the material clamp.
Techniques for cutting base molding, crown molding, bowed, round, and large materials.
Covers lubrication requirements and cleaning procedures for the tool.
Information on recommended saw blade types and specifications.
To Next Page
