DeWalt DCS576 - Page 45

43
ENGLISH
EC-Declaration of Conformity
Machinery Directive
Cordless Circular Saw
DCS575, DCS576
DeWALT
declares that these products described under Technical
Data are in compliance with:
2006/42/EC, EN62841-1:2015, EN62841-2-5:2014.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
DeWALT
at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
DeWALT
.
Markus Rompel
Vice President of Engineering, PTE-Europe
DeWALT
, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
14.10.2019
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment ofexposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total workingperiod.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
workpatterns.
English (original instructions)
190mm / 184mm 54V CORDLESS CIRCULAR SAW
DCS575, DCS576, DCS575XE, DCS576XE
Congratulations!
You have chosen a
DeWALT
tool. Years of experience, thorough product development and innovation make
DeWALT
one of the most
reliable partners for professional power toolusers.
Technical Data
DCS575 DCS575-XE DCS576 DCS576-XE
Voltage V
DC
54 54 54 54
Type 2/3 2/3 2/3 2/3
Battery type Li-Ion Li-Ion Li-Ion Li-Ion
No-load speed min
-1
5800 5800 5800 5800
Blade diameter mm 190 184 190 184
Maximum depth of cut mm 67 64 61 58
Blade bore mm 30 20 30 20
Bevel angle adjustment 57 57 57 57
Weight (without battery pack) kg 3.6 3.6 3.7 3.7
Noise values and/or vibration values (triax vector sum) according to EN62841-2-5:
L
PA
(emission sound pressure level) dB(A) 94 – 94 –
L
WA
(sound power level) dB(A) 105 – 105 –
K (uncertainty for the given sound level) dB(A) 3 – 3 –
Vibration emission value a
h,W
=
m/s
2
<2.5 – <2.5 –
Uncertainty K =
m/s
2
1.5 – 1.5 –