ENGLISH
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to thesesymbols.
DANGER: Indicates an imminently hazardous situation which, if not
avoided, will result in death or seriousinjury.
WARNING: Indicates a potentially hazardous situation which, if not
avoided, could result in death or seriousinjury.
CAUTION: Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderateinjury.
NOTICE: Indicates a practice not related to personal injury which,
if not avoided, may result in propertydamage.
Denotes risk of electricshock.
Denotes risk offire.
The vibration and/or noise emission level given in this information sheet has
been measured in accordance with a standardised test given in EN62841
and may be used to compare one tool with another. It may be used for a
preliminary assessment ofexposure.
WARNING: The declared vibration and/or noise emission level
represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly
maintained, the vibration and/or noise emission may differ. This may
significantly increase the exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/or noise should
also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly
reduce the exposure level over the total workingperiod.
Identify additional safety measures to protect the operator from
the effects of vibration and/or noise such as: maintain the tool
and the accessories, keep the hands warm (relevant for vibration),
organisation of workpatterns.
EC‑Declaration of Conformity
Machinery Directive and Radio Equipment Directive
Mitre Saw
DCS727
DEWALT declares that these products described under Technical Data are
in compliance with:
2006/42/EC, EN62841‑1:2015/AC:2015; EN62841‑3‑9:2015/AC:2016‑09.
These products also comply with Directive 2014/53/EU, 2014/30/EU and
2011/65/EU. For more information, please contact DEWALT at the following
address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf ofDEWALT.
Markus Rompel
Vice‑President Engineering, PTE‑Europa
DEWALT, Richard‑Klinger‑Straße 11,
D‑65510, Idstein, Germany
14.06.2019
DCS727
Voltage V
DC
54
Type 1
Battery type Li‑Ion
Blade diameter
mm 250
Blade bore
mm 30
Blade body thickness
mm 1.75
Max. kerf thickness
mm 3.0
Max. blade speed
min
-1
4300
Max. cross‑cut capacity 90°
mm 305
Max. mitre capacity 45°
mm 215
Max. depth of cut 90°
mm 90
Max. depth of bevel cross‑cut 45°
mm 50
Mitre (max. positions)
left 50°
right 60°
Bevel (max. positions)
left 49°
right 49°
0 ° mitre
Baseboard max. height 150 mm
mm 28
Resulting width at max. height 90 mm
mm 290
Resulting height at max. width 305 mm
mm 77
45 ° mitre left
Resulting width at max. height 90 mm
mm 200
Resulting height at max. width 210 mm
mm 77
45 ° mitre right
Resulting width at max. height 90 mm
mm 200
Resulting height at max. width 210 mm
mm 77
45 ° bevel left
Resulting width at max. height 60 mm
mm 290
Resulting height at max. width 305 mm
mm 50
45 ° bevel right
Resulting width at max. height 28 mm
mm 290
Resulting height at max. width 305 mm
mm 20
Automatic blade brake time
s < 4
Weight (without battery pack) kg 20.5
Noise values and/or vibration values (triax vector sum) according to EN62841‑3‑9:
L
PA
(emission sound pressure level) dB(A) 100.3
L
WA
(sound power level) dB(A) 111.7
K (uncertainty for the given sound level) dB(A) 3
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough product
development and innovation make DEWALT one of the most reliable
partners for professional power toolusers.
Technical Data
MITRE SAW
DCS727
To Next Page
Loading...
Need help?
General
