DeWalt DHS790 - Definitions: Safety Alert Symbols and Words

1
ENGLISH
English (original instructions)
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal injury or property damage.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or seriousinjury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or seriousinjury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderateinjury.

(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in propertydamage.

WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or seriousinjury.
WARNING: To reduce the risk of injury, read the
instructionmanual.
If you have any questions or comments about this or any
DeWALT
tool, call us toll free at:
1-800-4-
DeWALT
(1-800-433-9258).
1
Operating handle
2
Trigger switch
3
Trigger lock-off button
4
Lower guard
5
Mounting holes
6
Miter lock lever
7
Miter release button
8
Miter detent override lever
9
Kerf plate
10
Miter scale pointer
11
Miter scale
12
Miter scale screws
13
Base extensions
14
Fence
15
Bevel scale
16
Bevel scale pointer
17
Lock down pin
18
Lifting handle
19
CUTLINE™ worklight switch
20
Battery packs
21
Rails
22
Rail lock knob
23
Rail adjustment screw
24
Dust port
25
Hex wrench
26
Bevel lock knob
27
Clamp hole
28
Hand indentation
Fig. A
4
5
15
16
17
5
14
13 101112
5
8 679
28