ENGLISH
9
Battery Pack (fi g. A)
BATTERY TYPE
The DW052 operates on 12 volt battery packs.
The DW056 operates on 18 volt battery packs.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual,
the labels on the charger and the battery pack show
the following pictographs:
Read instruction manual
before use.
Battery charging
Battery charged
Battery defective
Hot/cold pack delay
Do not probe with conductive objects.
Do not charge damaged battery packs
Use only with DEWALT battery packs,
others may burst, causing personal injury
and damage.
Do not expose to water.
Have defective cords replaced
immediately.
Charge only between 4° C and 40° C.
Discard the battery pack with due care for
the environment.
Do not incinerate the battery pack
NiMH, NiCd+ and Li-Ion..
Charges NiMH and NiCd
battery packs.
Charges Li-Ion battery packs.
See technical data for charging time.
Package Contents
The package contains:
1 Cordless impact driver/wrench
2 Battery packs
1 Charger
1 Kitbox
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
INTENDED USE
The DW052, DW056 Cordless Impact Drivers/
Wrenches are designed for professional impact
screwdriving applications.
The impact function makes this tool particularly
useful for driving fasteners in wood, metal and
concrete. DO NOT use under wet conditions or in
presence of flammable liquids or gases.
The cordless impact drivers/wrenches are
professional power tools. DO NOT let children come
into contact with the tool. Supervision is required for
those under 16 years of age.
a. Variable speed switch
b. Forward/reverse slider
c. Tool holder
d. Pistol grip
e. Battery pack
f. Release buttons
g. Charger
h. Charging indicator (red)
Electrical Safety
The electric motor has been designed for one
voltage only. Always check that the battery pack
voltage corresponds to the voltage on the rating
plate. Also make sure that the voltage of your
charger corresponds to that of your mains.
To Next Page
Loading...
Need help?
General
