DeWalt DW718 - Alternative Method For Cutting Crown Molding; Instructions For Cutting Crown Molding Angled Between The Fence And Base Of The Saw For All Cuts; Special Cuts; Aluminum Cutting

go to:
INDEX - PREVIOUS - NEXT
DW718
4 Repair Instructions
Diagnosis and Root Cause
4.1
Diagnosis
Check the unit is not plugged in
• Check Cable
• Check whether blade is tight
• Check condition of blade
• Check condition of drive belt
• Check guard operation
Plug unit in
• Quick test and check all functions
• Make a test cut
• Check for accuracy