DeWalt DW718 - Unpacking Your Saw; Specifications; Capacity of Cut

Clamp:DW7082(similarmodelincluded)
Usedforfirmlyclampingworkpiecetothesawtableforprecisioncutting.
DustBag:DW7053(Includedwithsomemodels)
Equippedwithazipperforeasyemptying,thedustbagwillcapturethe
majorityofthesawdustproduced(notshown).
CrownMoldingFence:DW7084
Usedforprecisioncuttingofcrownmolding.
LaserGuideSystem:DW7187
Poweredbythesaw,thebrightlaserlinedeliversenhancedvisibilityinlow
andhighlightlocations.Easytoinstall.
SAWBLADES:ALWAYSUSE12"(305mm)SAWBLADESWITH1"
(25.4mm)ARBORHOLES.SPEEDRATINGMUSTBEATLEAST4800
RPM.Neveruseasmallerdiameterblade.Itwillnotbeguardedproperly.Use
crosscutbladesonly!Donotusebladesdesignedforripping,combination
bladesorbladeswithhookanglesinexcessof5°.
BLADEDESCRIPTIONS
APPLICATION MODEL# DIAMETERTEETH TOOTH
GRIND
ConstructionSawBlades (thin kerf with anti-stick rim)
General Purpose DW3123 12" 32 ATB
Fine Crosscuts DW3126 12" 60 ATB
Fine Crosscuts DW3128 12" 80 ATB
Woodworkinq Saw Blades (provide smooth, clean cuts)
Fine crosscuts DW7648 12" 60 ATB
Fine crosscuts DW7649 12" 80 ATB
Ultra-fine crosscuts DW7650 12" 96 ATB
Laminates DW7661 12" 80 TCG
Solid surface and plastics DW7668 12" 80 Mod TCG
Non-ferrous metals DW7666 12" 80 TCG
Unpacking Your Saw
Check the contents of your miter saw carton to make sure that you have
received all parts. In addition to this instruction manual, the carton should
contain:
1. One DW718 miter saw.
2. One DEWALT 12" (305 mm) diameter saw blade.
3. One blade wrench in wrench pocket shown in Figure 4.
4. One DW7053 Dustbag (some models).
5. One material clamp.
Specifications
CAPACITY OF CUT
50° miter right, 60° miter left
48° bevel left and right
0° miter
Max. Height 3.7" (94 mm) Result Width 12.9" (328 mm)
Max. Width 13.6" (345 mm) Result Height 2.9" (74 mm)
45° miter
Max. Height 3.7" (94 mm) Result Width 9.1" (231 mm)
Max. Width 9.5" (241 mm) Result Height 2.9" (74 mm)
DW7080
END
PLATE
LOCKNUTS
DW7082
DW7187
DW7084
DW7051
BRACKET