33
ENGLISH
3. Guard against electric shock.
Avoid body contact with earthed surfaces(e.g.,
pipes, radiators, cookers and refrigerators).
When using the tool under extreme
conditions(e.g., high humidity, when metal
swarf is being produced, etc.), electric safety
can be improved by inserting an isolating
transformer or a(FI) earth-leakage circuit-
breaker.
4. Keep other persons away.
Do not let persons, especially children, not
involved in the work, touch the tool or the
extension cord and keep them away from the
work area.
5. Store idle tools.
When not in use, tools must be stored in a dry
place and locked up securely, out of reach of
children.
6. Do not force the tool.
It will do the job better and safer at the rate to
which it was intended.
7. Use the right tool.
Do not force small tools to do the job of a heavy
duty tool. Do not use tools for purposes not
intended; for example do not use circular saws
to cut tree limbs or logs.
8. Dress properly.
Do not wear loose clothing or jewellery, as
these can be caught in moving parts. Non-
skid footwear is recommended when working
outdoors. Wear protective hair covering to
contain long hair.
9. Use protective equipment.
Always use safety glasses. Use a face or
dust mask if working operations create dust
or flying particles. If these particles might be
considerably hot, also wear a heat-resistant
apron. Wear ear protection at all times. Wear a
safety helmet at all times.
10. Connect dust extraction equipment.
If devices are provided for the connection
of dust extraction and collecting equipment,
ensure these are connected and properly used.
11. Do not abuse the cord.
Never yank the cord to disconnect it from
the socket. Keep the cord away from heat,
oil and sharp edges. Never carry the tool by its
cord.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
DW745
DEWALT declares that these products described
under Technical Data are in compliance with:
2006/42/EC, EN 61029-1, EN 61029-2-1.
These products also comply with Directive
2004/108/EC and 2011/65/EU. For more
information, please contact DEWALT at the following
address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
DEWALT.
Horst Grossmann
Vice President Engineering and Product
Development
DEWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
01.11.2013
Safety Instructions
WARNING! When using electric tools,
basic safety precautions should always
be followed to reduce the risk of fire,
electric shock and personal injury
including the following.
Read all these instructions before attempting to
operate this product and save these instructions.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
General Safety Rules
1. Keep work area clear.
Cluttered areas and benches invite injuries.
2. Consider work area environment.
Do not expose the tool to rain. Do not use the
tool in damp or wet conditions. Keep the work
area well lit(250 - 300 Lux). Do not use the tool
where there is a risk of causing fire or explosion,
e.g., in the presence of flammable liquids and
gases.
To Next Page
Loading...
