DeWalt DW872 - Page 23

16 en - 1
ENGLISH
TOOTHED CHOPSAW DW872
Congratulations!
You have chosen a DEWALT Power Tool. Years of
experience, thorough product development and
innovation make DEWALT one of the most reliable
partners for professional Power Tool users.
Table of contents
Technical data en - 1
EC-Declaration of conformity en - 1
Safety instructions en - 2
Package contents en - 4
Description en - 4
Electrical safety en - 4
Mains plug replacement (U.K. & Ireland only) en - 4
Using an extension cable en - 5
Assembly and adjustment en - 5
Instructions for use en - 7
Maintenance en - 7
Guarantee en - 8
Technical data
DW872
Voltage V 230
(U.K. & Ireland only) V 230/115
Power input W 2,200
No-load speed min
-1
1,300
Blade diameter mm 355
Blade bore mm 25.4
Blade body thickness mm 1.8
Blade kerf thickness mm 2.2
No. of blade teeth 70
Cross-cutting capacity at 90°
circular mm 131
square mm 120 x 120
rectangular mm 76 x 230
angular mm 140 x 140
Cross-cutting capacity at 45°
circular mm 115
square mm 105 x 105
rectangular mm 64 x 132
angular mm 93 x 93
Weight kg 22.5
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Fire hazard.
Sharp edges
EC-Declaration of conformity
DW872
DEWALT declares that these Power Tools have been
designed in compliance with: 98/37/EEC,
89/336/EEC, 73/23/EEC, EN 55014-2, EN 61029,
EN 55014, EN 61000-3-2 & EN 61000-3-3.
For more information, please contact DEWALT at the
address below, or refer to the back of the manual.
Level of sound pressure according to 86/188/EEC &
98/37/EEC, measured according to EN 61029:
DW872
L
pA
(sound pressure) dB(A)* 95
L
WA
(acoustic power) dB(A) 108
* at the operator’s ear
Take appropriate measures for the
protection of hearing if the sound
pressure of 85 dB(A) is exceeded.