43
English
A. Spindle lock button
B. Spindle
C. Side handle
D. Backing flange
E. Threaded clamp nut
F. Guard
G. Slider switch
INTENDED USE
This grinder is designed for professional grinding, sanding, wire
brushing, polishing or abrasive, cutting-off applications.
DO NOT use under wet conditions or in presence of flammable
liquids or gases.
This grinder is a professional power tool. DO NOT let children come
into contact with the tool. Supervision is required when inexperienced
operators use this tool.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of injury, turn unit off and
disconnect tool from power source before installing and
removing accessories, before making any adjustments or
removing/installing attachments or accessories.
WARNING: Prior to assembly and adjustment, ALWAYS unplug
tool.
ATTACHING SIDE HANDLE (FIG. 2)
The side handle (C) can be fitted to either side of
C
FIG. 2
the gear case in the threaded holes, as shown.
Before using the tool, check that the handle is
tightened se cure ly. Use a wrench to firmly
tighten the side handle.
V ............. volts A .............amperes
Hz........... hertz W ...........watts
min ......... minutes ..........alternating current
....... direct current
n
o ...........no load speed
........... Class I Construction ...........earthing terminal
............... (grounded) ...........safety alert symbol
............ Class II Construction …/min .... revolutions or
............... (double insulated) ............... reciprocation
BPM ....... beats per minute
..............per minute
sfpm ......surface feet
.............. per minute (sfpm)
DESCRIPTION
(FIG. 1)
WARNING: Never modify the power tool or any part of it. Damage
or personal injury could result.
G
A
C
B
F
FIG. 1
E
D
To Next Page
Loading...
