DeWalt DWS779 - Page 3

1
ENGLISH
1
10
19
14
9
18
32
11
27
15
33
English (original instructions)
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal injury or property damage.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or seriousinjury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or seriousinjury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderateinjury.

(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in propertydamage.

WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
seriousinjury.
WARNING: To reduce the risk of injury, read the
instructionmanual.
If you have any questions or comments about this or any
DeWALT
tool, call us toll free at:
1-800-4-
DeWALT
(1-800-433-9258).
1
Trigger switch
2
Operating handle
3
Mounting holes
4
Lower guard
5
Miter lock handle
6
Miter latch button
7
Miter scale
8
Miter scale screws
9
Hand indentations
10
Fence
11
Bevel lock knob
12
Dust duct inlet
13
Lifting handle
14
Fence adjustment knob
15
Dust port
16
Table
17
Lock down pin
18
Base
19
Spindle lock button
20
Wing nut
21
Vertical material clamp
22
Miter latch override
23
Rails
24
Depth stop
25
Kerf plate
26
Miter pointer screw
27
0° bevel stop
28
Depth adjustment screw
29
Rail lock knob
30
Miter pointer
31
Rail set screw adjustment
32
Base extension
33
45° bevel stop adjustment screw
Fig. A
2
13
29
31
23
14
9
3
7
12
5
5
4
6
22
8
10
17
21
26
28
20
24
25
30
16