DeWalt DXCM601 - Page 29

29
English
CODE POSSIBLE CAUSE POSSIBLE SOLUTION
27
Seized pump. Contact a D
e
WALT factory service center or a D
e
WALT authorized
service center.
28
Oil level too high. Reduce to proper level. See Compressor Pump Oil under
Maintenance.
29
Poor ventilation. Relocate compressor to an area with cool, dry, well circulated
air, at least 12 in. from nearest wall.
30
Dirty cooling surfaces. Clean all cooling surfaces thoroughly.
31
Too much back pressure in tank. Open drain valve when starting motor.
32
Compressor too cold. Move compressor to a warmer location.
E111389-C_OPERATOR MANUAL DXCM601_FPG_062118.indd 29 6/29/18 9:12 AM