DeWalt XR LI-ION DCMASST1 - Usage, Storage, and Residual Risks; Safe Handling, Storage, and Risks; Package Contents and Tool Identification; Contents and Identification

6
ENGLISH
Date Code Position (Fig.B)
The date code
13
, which also includes the year of manufacture,
is printed into thehousing.
Example:
2020XX XX
Year and week of Manufacture
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual beforeuse.
Wear eyeprotection.
Wear earprotection.
No hands
A
Hot surface. Do nottouch.
Do not expose the tool to rain or high humidity or leave
outdoors while it israining.
Switch the tool off. Before performing any maintenance
on the tool, remove the battery from thetool.
Keep bystandersaway.
Directive 2000/14/EC guaranteed soundpower.
Package Contents
The package contains:
1 String trimmer
1 Guard
2 Guard screws
2 Washers
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred duringtransport.
• Take the time to thoroughly read and understand this manual
prior tooperation.
Residual Risks
To ensure you have good footing on slopes, do not overreach.
Keep your balance at all times. Always walk, do notrun.
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged useetc.
Even with the application of the relevant safety regulations and
the implementation of safety devices, certain residual risks can
not be avoided. These include:
• Injuries caused by touching any rotating/movingparts.
• Injuries caused when changing any parts, blades
oraccessories.
• Injuries caused by prolonged use of a tool. When using any
tool for prolonged periods ensure you take regularbreaks.
• Impairment ofhearing.
• Do not put the appliance down until the cutting line has come
to a completestandstill.
• Use only the appropriate type of cutting line. Never use metal
cutting line or fishingline.
• Keep hands and feet away from the cutting line and blade at
all times, especially when switching on themotor.
• Before using the appliance and after any impact, check for
signs of wear or damage and repair asnecessary.
• Take care against injury from any device fitted for trimming
the filament line length. After extending new cutter line always
return the machine to its normal operating position before
switchingon.
• Close supervision is necessary when the appliance is used
nearchildren.
• This appliance is not intended for use by young or infirm
persons withoutsupervision.
• This appliance is not to be used as atoy.
• Use in a dry location only. Do not allow the appliance to
becomewet.
• Do not immerse the appliance inwater.
• Do not open the body casing. There are not user‑serviceable
parts inside
• Do not operate the appliance in explosive atmospheres, such
as in the presence of flammable liquids, gases ordust.
• When the appliance is stored or transported in a vehicle
it should be placed in the boot or restrained to prevent
movement following sudden changes in speed ordirection.
• When not in use, the appliance should be stored in a dry, well
ventilated place out of reach ofchildren.
• Children should not have access to storedappliances.
Safety of Others
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the
appliance by a person responsible for theirsafety.
• Children must be supervised to ensure that they do not play
with theappliance.
• Health hazards caused by breathing dust developed when
using your tool (example: working with wood, especially oak,
beech and MDF.)
• Risk of burns due to accessories becoming hot
duringoperation.
SAVE THESE INSTRUCTIONS