12
Capacity:
Dry Weight Capacity - lb (kg) 50 (22.7)
Cylinder Volume - cu ft (L) 15.8 (447.4)
Speed:
Tumbler Speed - RPM 45
Motor Size - 60 Hz - hp (kW) 2 hp & 0.5 (1.5 kw & 0.38)
Airow:
60 Hz Model - cfm (M3/min) 910 (25.8)
50 Hz Model - cfm (M3/min) 760 (21.5)
Dimensions:
Cabinet Height - in (cm) 72 1/4 (183.5)
Cabinet Width - in (cm) 34 1/2 (87.6)
Cabinet Depth - in (cm) 50 (127)
Door Opening - in (cm) 25 5/8 (65.1)
Floor to Door Bottom - in (cm) 27 1/4 (69.2)
Cylinder Diameter - in (cm) 32 1/2 (82.6)
Cylinder Depth - in (cm) 33 (83.8)
Lint Screen Area - sq in (sq cm) 708 (4568)
Weight:
Net weight - lb (kg) 560 (254)
Shipping Information:
Shipping Weight - lb (kg) 620 (281.2)
Shipping Height - in (cm) 77 1/4 (196.2)
Shipping Width - in (cm) 36 (91.4)
Shipping Depth - in (cm) 53 1/2 (135.9)
Gas Requirements (Gas Models Only):
Gas Supply Connection - in (mm) 1/2 (12.7)
Natural Gas Supply (Water Column) - in (cm) 5-8 (12.7 - 20.3)
LP Gas Supply (Water Column) - in (cm) 11 1/2 - 13 1/2 (29.2 - 34.3)
Gas Usage (Gas Models Only):
60Hz Model - BTU/hr (kW) 145,000 (42.5)
50Hz Model - BTU/hr (kW) 120,000 (35.2)
Electrical Requirements:
Gas Models:
Model Volts / Hz / Phase / Wiring Circuit Breaker / Running Amps / Wire Size / Reversing
-11 208-240 / 60 / 1 / 2 wire + ground 15 / 5.1 / #12 / Reversing
-39 230 / 50 / 1 / 2 wire + ground 10 / 5.1 / 2.1 mm
2
/ Reversing
Installation Recommendations:
Minimum Clearance Between Machines - in (cm) 0 (0)
Minimum Clearance Behind Machines - in (cm) 18 (45.7)
Make-Up Air Required - sq ft (sq cm) 1.25 (1161)
Exhaust Size - in (cm) 8 (20.3)
Max. Exhaust Back Pressure (Water Column) - in (mm) 0.3 (7.6)
Recommended Exhaust Length - ft (m) & 2 elbows 14 (4.3)
Water Requirements for Fire Response Models:
Water Inlet Size - in (mm) 3/4 (19)
Pressure (min/max) - psi (kPa) 40-120 (276-827))
T-50 EXPRESS DRYER SPECIFICATIONS
Part # 8533-112-001 7/21
To Next Page
Loading...
Need help?
General
