EasyManua.ls Logo

Dexter Laundry B Series - User Manual

Dexter Laundry B Series
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
8514-265-001 REV C PAGE 1
INDUSTRIAL DRYER
MODEL T-20X2 AND T-30X2 ON-PREMISE
B-SERIES CONTROL, ELECTRIC-HEATED
OPERATOR’S MANUAL
INSTALLATION & OPERATION INSTRUCTIONS
The dryer must not be stored or installed where it will be exposed to water and/or weather and is
suitable for use in room temperatures between 40F and 105F (5C and 45C.)
Post the following “For Your Safety” caution in a prominent location:
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any
other appliance or machine.
It is important that you read this Manual and retain it for future reference. For service or
replacement parts, contact the Dexter Distributor in your area or the manufacturer.
WARNING / Avertissement
WARNING– Risk of Fire / Avertissement: Risque d’incendie
Clothes dryer installation must be performed by a qualified installer. / L’installation de la
sécheuse doit être effectuée par un spécialiste qualifié.
Install the clothes dryer according to the manufacturer’s instructions and local codes.
Do not install a clothes dryer with flexible plastic venting materials. If flexible metal (foil type)
duct is installed, use duct that has been investigated and found acceptable for use with clothes
dryers. Flexible venting materials are known to collapse, be easily crushed, and trap lint.
These conditions will obstruct clothes dryer airflow and increase the risk of fire. / Ne pas
installer une sécheuse avec des matériaux de ventilation en plastique. Dans le cas un
conduit en métal flexible (du genre à feuille) est installé, il doit être d’un type spécifique
identifié par le fabricant de l’appareil comme acceptable pour les sécheuses. Les matériaux de
ventilation flexibles sont réputés pour s’aplatir, se déformer facilement et collecter de la
peluche. Ces conditions vont obstruer l’écoulement d’air de la sécheuse et augmenter le risque
d’incendie.
To reduce the risk of severe injury or death, follow all installation instructions. / Pour réduire le
risque de blessures graves ou mortelles, suivre toutes les instructions d’installation.
Save these instructions. / Garder les instructions.
Dexter Laundry, Inc.
2211 West Grimes Avenue
Fairfield, Iowa 52556

Other manuals for Dexter Laundry B Series

Questions and Answers

  • G
    gloverreneeSep 23, 2025
    What to do if my Dexter Laundry Dryer tumbler does not turn?
    • J
      Jonathon HaleSep 23, 2025
      If the tumbler on your Dexter Laundry Dryer isn't turning, there are several things you can check: * First, make sure the control display shows time available for drying. * Confirm that the loading door and the lint compartment door are completely closed. * Inspect the drive belts for excessive wear and replace them if needed. * Check the control transformer primary fuse (50Hz: 2.0A) and secondary fuse (50Hz: 2.5A) for continuity, replacing them if there is no continuity.
  • C
    christopher84Aug 25, 2025
    What does “PCB Error” or “Comm Error” code mean on my Dexter Laundry Dryer?
    • A
      allisonlopezAug 25, 2025
      If you see a “PCB Error” or “Comm Error” code, it indicates a control error. Try turning the dryer off and then on again to clear the code. If the error persists, contact a Dexter Agent for assistance.
  • D
    Dr. Lisa RivasAug 25, 2025
    What does “Temp Sensor Short” or “Temp Sensor Open” error mean on Dexter Laundry B Series Dryer?
    • L
      Lawrence TaylorAug 26, 2025
      If the display shows a “Temp Sensor Short” or “Temp Sensor Open” error code, it relates to the temperature sensor. Press the programming button to clear the error code. If the error continues, contact a Dexter agent for help.
  • M
    Michelle WhiteAug 27, 2025
    Why Dexter Laundry B Series tumbler turns, but there is no burner flame?
    • J
      Jeffrey VillarrealAug 27, 2025
      First, check that the gas shut-off valve is in the open position. If the issue continues, follow the procedure for checking the ignition cycle listed in the Dryer Ignition section of this manual.
  • R
    Ryan JonesSep 23, 2025
    Why Dexter Laundry Dryer tumbler turns, but heating element is off?
    • J
      Jennifer PhillipsSep 23, 2025
      If the tumbler in your Dexter Laundry Dryer is turning, but the heating element is off, check the circuit breakers to ensure they are on. Also, check the heating element relay and heat relay to ensure they are on and the wires are connected.
  • E
    Erin PachecoSep 13, 2025
    Why is there 'NO HEAT RISE' in my Dexter Laundry B Series?
    • W
      Wendy MorrisSep 13, 2025
      If there is 'NO HEAT RISE' in your Dexter Laundry Dryer, test the safeties, including the high limit, air flow switch, and overtemp thermostat.
  • M
    Miss Samantha KramerSep 12, 2025
    What to do if my Dexter Laundry Dryer displays 'TEMP SENSOR SHORT'?
    • S
      Sandra HeathSep 12, 2025
      If your Dexter Laundry Dryer displays 'TEMP SENSOR SHORT', inspect the temperature probe wires. Ohm test the temperature probe; it should read 10K Ohms at room temperature.
  • J
    Jessica AllisonSep 12, 2025
    What does 'TEMP SENSOR OPEN' mean on my Dexter Laundry B Series Dryer and how do I fix it?
    • E
      Edward SchroederSep 12, 2025
      If your Dexter Laundry Dryer shows 'TEMP SENSOR OPEN', inspect the temperature probe wires. Perform an Ohm test on the temperature probe; it should measure 10K Ohms at room temperature.
  • A
    Andrea MartinezSep 4, 2025
    What to do if the Dexter Laundry B Series tumbler turns, but there is no burner flame?
    • L
      Lynn Williams MDSep 4, 2025
      If the tumbler of your Dexter Laundry Dryer turns, but there is no burner flame, check the following: * Ensure the gas shut-off valve is in the open position. * Follow the procedure for checking the ignition cycle listed in Dryer Ignition section of this manual.
  • D
    David OrozcoSep 2, 2025
    Why is my Dexter Laundry Dryer drying so slowly?
    • R
      Robert WalkerSep 2, 2025
      If your Dexter Laundry Dryer is drying clothes slowly, there might be several reasons: * Ensure the correct temperature setting is selected. * Clean the lint screen. * Check for any obstructions in the exhaust and follow the installation guidelines. * Adhere to the installation guidelines for static back pressure and make-up air to resolve airflow restrictions.

Dexter Laundry B Series Specifications

General IconGeneral
BrandDexter Laundry
ModelB Series
CategoryDryer
LanguageEnglish

Related product manuals