6
8514-311-001 REV PR
WARNING
CUT HAZARD! THERE ARE
SHARP EDGES ON VARIOUS
SHEET METAL PARTS
INTERNAL TO THE
ENCLOSURE. USE SAFETY
CONSCIOUSNESS WHEN
PLACING OR MOVING YOUR
HANDS WHILE WORKING IN
THE INTERIOR OF THIS
EQUIPMENT.
WARNING
SHOCK HAZARD! THERE IS
HIGH VOLTAGE AND
MOVING PARTS BEHIND
THE GUARDS. USE THE
SUPPLY DISCONNECTING
DEVICE FOR EACH SUPPLY
TO THE DRYER TO LOCK
OUT AND TAG OUT THE
UNIT BEFORE SERVICING.
FAILURE TO DO SO CAN
CAUSE SERIOUS INJURY
OR EVEN DEATH.
WARNING
REPLACE FUSES WITH
SAME TYPE AND RATING
INFORMATION
The A-weighted emission sound pressure level
does not exceed 70dB(A). The operator does
not need hearing protection.
INFORMATION
The dryer will operate correctly in ambient
temperatures of +5°C to +40°C, in relative
humidity up to 50% at +40°C and above 50%
when below +40°C, and at altitudes up to
1000m above sea level, must be transported
and stored from -25°C to +55°C and up to
+70°C for short periods of time, and has been
packaged to prevent damage from humidity,
vibration, and shock. Take measures to avoid
harmful effects of occasional condensation.
INFORMATION
It is important that the earthing screw next to
the power terminal block TB-1 be connected to
a good external earth.
INFORMATION
The dryer does not emit hazardous radiation.
INFORMATION
The installer must test the dryer for
operation and instruct the user before
leaving the installation.
To Next Page
Loading...
Need help?
General
