Dexter Laundry T-50 - User Manual

Other manuals for Dexter Laundry T-50

Original Instructions31 pages

Operator's Manual80 pages

Parts & Service Manual132 pages

Questions and Answers

M
megan76Sep 23, 2025
What to do if my Dexter Laundry Dryer tumbler does not turn?
- G
  geoffreymontgomerySep 23, 2025
  If the tumbler on your Dexter Laundry Dryer isn't turning, there are several things you can check: * First, make sure the control display shows time available for drying. * Confirm that the loading door and the lint compartment door are completely closed. * Inspect the drive belts for excessive wear and replace them if needed. * Check the control transformer primary fuse (50Hz: 2.0A) and secondary fuse (50Hz: 2.5A) for continuity, replacing them if there is no continuity.
W
Wesley SpenceAug 25, 2025
What does “PCB Error” or “Comm Error” code mean on my Dexter Laundry T-50 Dryer?
- R
  rwestAug 25, 2025
  If you see a “PCB Error” or “Comm Error” code, it indicates a control error. Try turning the dryer off and then on again to clear the code. If the error persists, contact a Dexter Agent for assistance.
S
Samantha MccoyAug 25, 2025
What does “Temp Sensor Short” or “Temp Sensor Open” error mean on Dexter Laundry T-50?
- L
  lmontoyaAug 26, 2025
  If the display shows a “Temp Sensor Short” or “Temp Sensor Open” error code, it relates to the temperature sensor. Press the programming button to clear the error code. If the error continues, contact a Dexter agent for help.
R
rickyparkerAug 27, 2025
Why Dexter Laundry T-50 tumbler turns, but there is no burner flame?
- K
  Keith WhiteAug 27, 2025
  First, check that the gas shut-off valve is in the open position. If the issue continues, follow the procedure for checking the ignition cycle listed in the Dryer Ignition section of this manual.
K
Kathleen VargasSep 23, 2025
Why Dexter Laundry Dryer tumbler turns, but heating element is off?
- C
  Carol PhamSep 23, 2025
  If the tumbler in your Dexter Laundry Dryer is turning, but the heating element is off, check the circuit breakers to ensure they are on. Also, check the heating element relay and heat relay to ensure they are on and the wires are connected.
J
Jason WatsonSep 13, 2025
Why is there 'NO HEAT RISE' in my Dexter Laundry T-50 Dryer?
- M
  Michael DudleySep 13, 2025
  If there is 'NO HEAT RISE' in your Dexter Laundry Dryer, test the safeties, including the high limit, air flow switch, and overtemp thermostat.
K
Kristina JonesSep 12, 2025
What to do if my Dexter Laundry T-50 Dryer displays 'TEMP SENSOR SHORT'?
- S
  Sarah WhiteSep 12, 2025
  If your Dexter Laundry Dryer displays 'TEMP SENSOR SHORT', inspect the temperature probe wires. Ohm test the temperature probe; it should read 10K Ohms at room temperature.
J
Jeremy MillerSep 12, 2025
What does 'TEMP SENSOR OPEN' mean on my Dexter Laundry T-50 and how do I fix it?
- C
  carlaustinSep 12, 2025
  If your Dexter Laundry Dryer shows 'TEMP SENSOR OPEN', inspect the temperature probe wires. Perform an Ohm test on the temperature probe; it should measure 10K Ohms at room temperature.
G
greenrobertSep 4, 2025
What to do if the Dexter Laundry T-50 Dryer tumbler turns, but there is no burner flame?
- J
  justin06Sep 4, 2025
  If the tumbler of your Dexter Laundry Dryer turns, but there is no burner flame, check the following: * Ensure the gas shut-off valve is in the open position. * Follow the procedure for checking the ignition cycle listed in Dryer Ignition section of this manual.
E
Emily QuinnSep 2, 2025
Why is my Dexter Laundry T-50 Dryer drying so slowly?
- D
  David MarshallSep 2, 2025
  If your Dexter Laundry Dryer is drying clothes slowly, there might be several reasons: * Ensure the correct temperature setting is selected. * Clean the lint screen. * Check for any obstructions in the exhaust and follow the installation guidelines. * Adhere to the installation guidelines for static back pressure and make-up air to resolve airflow restrictions.