To Next PageTo Next PageWhat to do if my Dexter Laundry T-80 Dryer shows 'HEAT RISE OUT OF RANGE'?
If your Dexter Laundry Dryer displays 'HEAT RISE OUT OF RANGE', inspect the temperature probe and its connections. Perform an Ohm test on the temperature probe, which should measure 10K Ohms at room temperature.
What does “PCB Error” or “Comm Error” code mean on my Dexter Laundry T-80 Dryer?
If you see a “PCB Error” or “Comm Error” code, it indicates a control error. Try turning the dryer off and then on again to clear the code. If the error persists, contact a Dexter Agent for assistance.
What does “Temp Sensor Short” or “Temp Sensor Open” error mean on Dexter Laundry T-80 Dryer?
If the display shows a “Temp Sensor Short” or “Temp Sensor Open” error code, it relates to the temperature sensor. Press the programming button to clear the error code. If the error continues, contact a Dexter agent for help.
Why Dexter Laundry T-80 Dryer tumbler turns, but there is no burner flame?
First, check that the gas shut-off valve is in the open position. If the issue continues, follow the procedure for checking the ignition cycle listed in the Dryer Ignition section of this manual.
Why does my Dexter Laundry T-80 Dryer say 'Operation in Progress'?
The 'Operation in Progress' message on your Dexter Laundry Dryer indicates that the current drying cycle hasn't finished. The error will automatically disappear once the operation is complete.
What to do if my Dexter Laundry T-80 Dryer experiences a power loss?
If your Dexter Laundry Dryer experiences a power loss, test the incoming voltage and ensure it matches the correct transformer tap. Also, test the step-down transformer to confirm the voltage is within the appropriate range.
Why is my Dexter Laundry T-80 drying so slowly?
If your Dexter Laundry Dryer is drying clothes slowly, there might be several reasons: * Ensure the correct temperature setting is selected. * Clean the lint screen. * Check for any obstructions in the exhaust and follow the installation guidelines. * Adhere to the installation guidelines for static back pressure and make-up air to resolve airflow restrictions.
Why is there 'NO HEAT RISE' in my Dexter Laundry T-80?
If there is 'NO HEAT RISE' in your Dexter Laundry Dryer, test the safeties, including the high limit, air flow switch, and overtemp thermostat.
What to do if my Dexter Laundry Dryer displays 'TEMP SENSOR SHORT'?
If your Dexter Laundry Dryer displays 'TEMP SENSOR SHORT', inspect the temperature probe wires. Ohm test the temperature probe; it should read 10K Ohms at room temperature.
What does 'TEMP SENSOR OPEN' mean on my Dexter Laundry Dryer and how do I fix it?
If your Dexter Laundry Dryer shows 'TEMP SENSOR OPEN', inspect the temperature probe wires. Perform an Ohm test on the temperature probe; it should measure 10K Ohms at room temperature.
General| Brand | Dexter Laundry |
|---|---|
| Model | T-80 |
| Category | Dryer |
| Language | English |
Critical warnings about injury, death, property damage, and adherence to instructions.
Restrictions on drying water-cleaned fabrics and risks with flammable substances.
Guidelines for electrical safety, grounding, and qualified personnel for servicing.
Instructions for safe dryer operation, disconnection, and installation.
Step-by-step guide for installing the dryer, including uncrating, clearances, and connections.
Guidance for diagnosing and resolving common dryer issues and understanding fault codes.
