Dexter Laundry B Series Parts & Service Manual

14
Capacity:
Dry Weight Capacity - lb (kg) 80 (36.3)
Cylinder Volume - cu ft (L) 23 (651.3)
Speed:
Tumbler Speed - RPM 40
Motor Size - 60 Hz Model - hp (kW) 1 (0.75)
Motor Size - 50 Hz Model - hp (kW) 0.75 (0.56)
Motor Size - Reversing Models - hp (kW) 1 & 0.75 (0.75 & 0.56)
Airow:
60 Hz Model - cfm (M3/min) 1200 (34)
50 Hz Model - cfm (M3/min) 1000 (28.3)
Dimensions:
Cabinet Height - in (cm) 75 3/4 (192.4)
Cabinet Width - in (cm) 38 1/2 (97.8)
Cabinet Depth - in (cm) 51 3/4 (131.4)
Door Opening - in (cm) 25 5/8 (65.1)
Floor to Door Bottom - in (cm) 29 1/4 (74.3)
Cylinder Diameter - in (cm) 36 1/2 (92.7)
Cylinder Depth - in (cm) 38 (96.5)
Lint Screen Area - sq in (sq cm) 823 (5310)
Weight:
Net Weight - lb (kg) 715 (324.3)
Shipping Information:
Shipping Weight - lb (kg) 770 (349.3)
Shipping Height - in (cm) 80 3/4 (205.1)
Shipping Width - in (cm) 40 1/4 (102.2)
Shipping Depth - in (cm) 55 1/2 (141)
Gas Requirements (Gas Models Only):
Gas Supply Connection - in (mm) 3/4 (19.1)
Natural Gas Supply (Water Column) - in (cm) 5-8 (12.7 - 20.3)
LP Gas Supply (Water Column) - in (cm) 11 1/2- 13 1/2 (29.2 - 34.3)
Gas Usage (Gas Models Only):
60Hz Model - BTU/hr (kW) 215,000 (63)
50Hz Model - BTU/hr (kW) 195,000 (57.1)
Electrical Requirements:
Gas Models:
Model Volts / Hz / Phase / Wiring Circuit Breaker / Running Amps / Wire Size / Reversing
-10 120 / 60 / 1 / 2 wire + ground 15 / 10.4 / #12 / Reversing
-11 208-240 / 60 / 1 / 2 wire + ground 15 / 5.5 / #12 / Reversing
-15 208-240 / 60 / 1 / 2 wire + ground 15 / 5.5 / #12 / Non-Rev
-15 120 / 60 / 1 / 2 wire + ground 15 / 10.4 / #12 / Non-Rev
-39 230 / 50 / 1 / 2 wire + ground 10 / 5.2 / 2.1 mm
2
/ Both
Installation Recommendations:
Minimum Clearance Between Machines - in (cm) 0 (0)
Minimum Clearance Behind Machines - in (cm) 18 (45.7)
Make-Up Air Required - sq ft (sq cm) 1.5 (1394)
Exhaust Size - in (cm) 8 (20.3)
Max. Exhaust Back Pressure (Water Column) - in (mm) 0.3 (7.6)
Recommended Exhaust Length - ft (m) & 2 elbows 14 (4.3)
Water Requirements for Fire Response Models:
Water Inlet Size - in (mm) 3/4 (19)
Pressure (min/max) - psi (kPa) 40-120 (276-827))
T-80 EXPRESS DRYER SPECIFICATIONS
Part # 8533-112-001 7/21

Dexter Laundry B Series Specifications

General

Brand	Dexter Laundry
Model	B Series
Category	Dryer
Language	English