8514-234-001 REV N page 6
SPECIFICATIONS
120 lb. Commercial Dryer: T-120 Reversing Tumbler
DC0120N_-10EC_R (60 Hz), DC0120N_-39AC_R (50 Hz)
Cabinet Height 85 5/16” 2167 mm.
Cabinet Width 46 3/4” 1187 mm.
Cabinet Depth 60 3/16” 1528 mm.
Floor to Bottom of Door 34” 864 mm.
Door Opening 30” 762 mm.
Dry Wt. Capacity 120 lbs. 54.4 kg.
Cylinder Diameter 43” 1092 mm.
Cylinder Depth 43” 1092 mm.
Cylinder Volume 36.1 cu. ft. 1022.2 liters
Lint Screen Area 862 sq. in. 5561 sq. cm.
Gas Input (60 hz) 320,000 Btu/hr 338MJ/hr (93.8 kW)
Gas Input (50 hz) 300,000 Btu/hr 317MJ/hr (87.9 kW)
Gas Supply Connection 3/4” 19.1 mm.
Natural Gas Supply (Water Column) 5” - 8” 127 mm. - 203 mm./1.25kPa – 1.99kPa
Natural Burner Manifold
(60 hz Water Column) 3.5” 88.9 mm./0.87kPa
(50 hz Water Column) 3.5” 88.9 mm./0.87kPa
Propane or ULPG Supply (Water Column) 11.5” - 13.5” 292 mm. - 343 mm./2.86kPa - 3.36kPa
Burner Manifold Pressure
Propane (60 hz Water Column) 11” 279 mm./2.75kPa
Propane or ULPG (50 hz Water Column) 10” 254 mm./2.5kPa
Exhaust Size 10” or 12” 254 or 305 mm.
Make-up Air 2.25 sq. ft. 2090 sq. cm.
Example: 2.25 sq. ft = 2.25 ft. long X 1 ft. wide
Motor Size-Tumbler (50 or 60 Hz) 1 H.P. .746 kW
Motor Size-Blower (60 Hz) 1 H.P. .746 kW
Motor Size-Blower (50 Hz) 3/4 H.P. .560 kW
Airflow – 12” Outlet (60 hz) 1450 CFM 41.1 m^3/min
Airflow – 10” Outlet (60 hz) 1250 CFM 35.4 m^3/min
Airflow – 10” or 12” Outlet (50 hz) 1000 CFM 28.3 m^3/min
Electrical Specifications - 120/60/1
Voltage/Hz/Phase 120V/60Hz/1Phase
Running Amps 15.0
Circuit Protection Amps 25
Wire Size 12 gauge
Electrical Service 2 wire + ground
Electrical Specifications - 230/50/1
Voltage/Hz/Phase 230V/50Hz/1Phase
Running Amps 10.0
Circuit Protection Amps 20
Wire Size 3.5 mm2
Electrical Service 2 wire + ground
Shipping Weight 1090 lbs. 494.4 kg.
Net Weight 950 lbs. 431 kg.
Clearance Behind Machines (min.) 18” 457 mm.
To Next Page
Loading...
Need help?
General
