ENGLISH
BEFORE WELDI NG
Read and understand all
instructions befor e using.
Please read, learn and respect the basic rules given in this manual.
This hand mask Model is in compliance with the requirements of the EN 175 European Standard (Personal protection. Equip-
ment for eye and face protection during welding and allied processes) The radiation emitted by the electric arc during welding
can damage the eyes and burn the skin. In addition, welding produces sparks and drops of molten metal that y in all directions.
unlimited protection against major shocks or impacts, explosive mechanisms or corrosive liquids. Avoid welding or cutting in these
severe environments.
Regularly check the conditions of the mask:
mask to make sure there are no signs of deformation or deterioration.
Oxyacetylene, laser or gas welding and cutting is not permitted with this mask.
Before each use :
- Carefully inspect the mask.
- Replace worn or damaged parts immediately.
- Replace face shields if they are cracked or scratched to prevent damage to the user’s eyes.
-Subjects with particularly sensitive skin must take extra care: materials that may come into contact with the skin can cause allergic
reactions.
be undertaken. Any damage to persons or property caused by use not in accordance with the instructions in this manual shall not
Maintenance
luminous radiations as well as from molten metal drops. After using the mask and before putting it away after working, it must be
visibility.
- Regularly clean and change the guard screens. - Clean the inside and outside of the mask with a neutral detergent-disinfectant.
Do not use solvents.
-Do not place heavy objects or tools on or in the facepiece to avoid damage to the face shields. Mask storage temperatures range
from +5°C to +30°C. - We recommend using the mask and visors for 5 years. The length of use depends on various factors such
as type of use, cleaning, storage and maintenance.
FILTER SPECIFICATIONS
techniques. Transmittance requirements and recommended use” Standards.
INFORMATION ON THE MARKING
The marking in the inner lower front section of the mask is made up of a series of symbols with the
following meaning:
AWELCO
175
CE CE marking
To Next Page
Loading...