Need help?Do you have a question about the Deye SUN-100K-G03 and is the answer not in the manual?
General| Model | SUN-100K-G03 |
|---|---|
| Rated Power | 100 kW |
| Max. DC Input Power | 150 kW |
| Max DC Input Voltage | 1100 V |
| Start Voltage | 250 V |
| Number of MPP Trackers | 10 |
| Number of Strings per MPP Tracker | 2 |
| Max. Input Current per MPPT | 26 A |
| Rated AC Output Power | 100 kW |
| Max. AC Apparent Power | 110 kVA |
| AC Voltage Range | 310 V - 480 V |
| Grid Frequency | 50/60 Hz |
| Total Harmonic Distortion (THD) | <3% |
| DC Switch | Yes |
| Protection Degree | IP65 |
| Max DC Input Power | 150 kW |
| Max AC Output Power | 110kW |
| AC Output Frequency | 50/60 Hz |
| Input Voltage Range | 200 V - 1000 V |
| MPPT Voltage Range | 450 V - 850 V |
| Rated AC Voltage | 400 V |
| Power Factor Adjustment Range | 0.8 leading to 0.8 lagging |
| Protection | DC Reverse Polarity Protection, AC Short Circuit Protection |
| Operating Temperature Range | -25°C to +60°C |
| Cooling | Smart cooling |
| MPPT Range | 450 V - 850 V |
| AC Output Voltage | 400 V |
| Efficiency | 98.7% |
| Humidity | 0-100% |
Provides critical safety guidelines for installation and operation.
Specifies criteria for choosing a suitable and safe installation site.
Explains how to connect the DC input terminals for the PV modules.
Details the process for connecting the AC output terminals to the grid.
Explains the importance and procedure for grounding the inverter.
Lists the steps required to power on and start the inverter.
Outlines the procedure for safely powering off the inverter.
Lists error codes and their corresponding descriptions and solutions.
To Next Page