DG Flugzeugbau DG-1000T User Manual

0.0
DG Flugzeugbau GmbH
Otto-Lilienthal-Weg 2 / Am Flugplatz  D-76646 Bruchsal  Germany
Postbox 1480, D-76604 Bruchsal  Deutschland
Tel. 07251/3020-100  Telefax 07251/3020-200  eMail: dg@dg-flugzeugbau.de
Spare part and material sales: Tel. 07251/3020-270  lager@dg-flugzeugbau.de
http://www.dg-flugzeugbau.de
INSTRUCTIONS FOR CONTINUED AIRWORTHINESS
MAINTENANCE MANUAL
FOR THE
MOTORGLIDER
DG-1000T
Type: DG-1000
Variant DG-1000T
Data Sheet No.: EASA.A.072
Factory Serial No.: __________________________
Registration No.: __________________________
Date of Issue: June 2005

DG Flugzeugbau DG-1000T Specifications

General

Type	Sailplane
Manufacturer	DG Flugzeugbau
Wingspan	18 m (59 ft 1 in)
Aspect ratio	19.9
Max takeoff weight	750 kg (1, 653 lb)
Crew	1 or 2
Wing area	16.3 m² (175 sq ft)
Power	84 kW (113 hp)
Cruise Speed	120 km/h
Maximum speed	280 km/h (170 mph, 150 kn)

Summary

Aircraft Identification and Introduction

Instructions for Continued Airworthiness

Document outlining airworthiness requirements and procedures for the aircraft.

Maintenance Manual DG-1000T Title

Formal title page of the DG-1000T Maintenance Manual.

General Information and Document Structure

Manual Amendments

Details changes and updates to the maintenance manual.

List of Effective Pages

Provides a list of all effective pages in the manual.

System Description and Adjustment Data

Wing and Tailplane Setting Data

Specifications for wing and tailplane geometry and alignment.

Elevator Control and Trim System

Details the elevator control mechanism, deflections, and trim adjustments.

Inspections

Daily Inspection

Procedures for routine pre-flight checks.

Regular Inspections

Covers annual and 100-hour inspection requirements.

Maintenance Procedures

General Maintenance

Guidelines for general upkeep and exterior surface care.

Assembly and Servicing Work

Water ballast system

Procedures for replacement of water ballast bags and servicing dump valves.

Control Circuit Cable Replacement

Instructions for replacing control cables and adjusting control circuits.

Weight and Balance

Empty Weight and CG Measurements

Method for determining empty weight center of gravity.