2
INDEX
PART 1 – QUICK INSTALLATION GUIDE
SAFETY STANDARDS 3
INSTALLATION 3
POWER CONNECTIONS, PRESSURE AND FLOW SIGNAL CONNECTIONS 3
INPUT / OUTPUT SIGNAL CONNECTIONS 5
INPUT CONNECTIONS 5
OUTPUT CONNECTIONS 5
MASTER-SLAVE CONNECTIONS 5
STARTING UP 6
ACCESS TO MAIN MENU AND PARAMETER MENU 6
SELF-LEARING CONFIGURATION 7
MAIN MENU AND PARAMETER MENU 8
SETTING THE PARAMETERS REQUIRED FOR OPERATION 9
Setting the system pressure and the rated current 9
Checking the direction of rotation of the motor 10
Checking the motor frequency (default 50 Hz) 11
Checking the maximum working frequency (default 50 Hz) 11
Determination of the shutdown frequency 11
setting the full scale of the pressure sensor 11
Configuration of the flow sensor 11
CONTROL OF DRY RUNNING IN APPLICATIONS WITHOUT FLOW SENSOR 12
TEST 13
ALARMS 14
PARTE 2 – USER’S MANUAL
PRODUCT DESCRIPTION 15
GENERAL TECHNICAL DATA and WORKING LIMITS 17
DIMENSIONS AND WEIGHTS 17
MULTI-PUMPS UNITS 18
models and product identification code 19
SURGE TANK 20
SAFETY PRESSURE SWITCH 20
FUNCTIONING 21
1. CONFIGURATION 21
1.1. BASIC CONFIGURATION (BASE SETUP) 22
1.2. ADVANCED CONFIGURAZIONE ( ADVANCED SETUP) 23
1.3. HARDWARE CONFIGURATION (HARDWARE SETUP) 27
1.4. MAINTENANCE (MAINTENANCE) 31
2. TEST 32
3. WORKING 33
4. OUT OF SERVICE 34
5. UPDATING 35
STARTING UP 37
TROUBLESHOOTING 38
WARRANTY 40
DISPOSAL 40
DECLARATION OF CONFORMITY 40
To Next Page
Loading...
