To listen to an auxiliary device, use a 3.5mm
auxiliary cable to connect it to the main unit.
Press [Standby] to turn on the main unit.♦
Start playback on the auxiliary device.♦
Press [AUX/iPod] to set the main unit to ♦
AUX mode.
The auxiliary device must have a
3.5mm headphone out or line-out
connection. Examples of an
auxiliary device are iPod
®
shuffle
and MP3/MP4 players.
Controls
When the main unit is in AUX mode, the
following controls are available.
Remote
Key
Function
[VOL +] Increase the volume level.
[VOL –] Decrease the volume level.
[MUTE] Disable or enable speaker
output.
[BASS] Turn the Bass Boost
enhancement on or off.
[ROTATE] Rotate the dock.
[AUX/iPod] Press to switch between
AUX and iPod modes.
Use the controls of the auxiliary
device directly to control playback.
| 11
Using AUX Mode
To Next Page
Loading...
