Need help?Do you have a question about the Dialog WLC-4150-C and is the answer not in the manual?
General| Frequency | 50/60Hz |
|---|---|
| Power Factor | >0.9 |
| THD | <20% |
| Dimming Range | 10-100% |
| Warranty | 5 years |
| Dimming Type | 0-10V |
| Protection | Over Voltage, Short Circuit |
| Certifications | UL |
| Lifespan | 50, 000 hours |
| Input Voltage | 120-277VAC |
Manage outputs.
Manage groups.
Manage presets.
Manage modes.
Manage lists of events.
Manage daylight modes and sensors.
Manage schedules of presets or group actions.
Edit the date, time, and security settings such as your password.
View the most recent 100 event logs.
Output menu has two submenus-Outputs and Setup.
The Outputs screen displays the properties for each panel.
To modify a label name.
To override the control settings.
You can view the historical activity for a selected output.
Select an output and select the Properties button.
The Groups menu has two submenus-Groups and Headers.
The Groups screen displays all of the relay lighting control groups you have set up.
To modify a label name.
To override the control group settings.
You can view the historical activity for a selected group.
Select a group to access the configuration options.
The Presets menu has two submenus-Local and Global.
The Local Presets screen displays all of the local presets.
To modify a preset name.
To activate or deactivate a preset.
You can view the historical activity for a selected preset.
To configure a selected preset.
The Modes menu has three menus-Output Modes, Input Modes, and Constant Lighting Control Functions.
The Output Modes menu has four submenus.
The Astro screen displays all Astro Modes.
The Timeout screen displays all Timeout Modes.
The Flick screen displays all Flick modes.
The Perm Block screen displays all Perm Block modes.
The Input Modes menu has two submenus-Quiet and Perm Block.
The Quiet screen displays the Quiet modes.
The Behavior menu has submenu-Quiet.
The Behaviors screen displays all behaviors.
To modify a behavior name.
To activate, deactivate, or modify a behavior.
You can view the historical activity for a selected mode.
The Modes menu has two menus-Daylight Sensors and Constant Lighting Control Functions.
The Daylight Sensors menu has two submenus.
The Local Sensors screen displays the local sensors.
The Global Sensors screen displays the global sensors.
The Schedules menu has two menus-Time Schedules and Setup.
The All Schedules screen displays the schedules for the Lighting Control Unit.
To modify a mode name.
To modify targets, disable, or set start and end dates for a schedule.
You can view the historical activity for a selected mode.
The Settings menu has ten submenus.
The About DIALOG® screen provides information about the system software.
The Global Web Server screen allows you to change global web server settings.
The DIALOG® Discovery allows the user to direct the LCU to perform a discovery check.
The Event Logs screen displays the most recent 100 system events and actions in chronological order.
You can refresh the list by clicking the Refresh List icon.
User logged in status.
System started status.
To Next Page
