Diamond Kinetics PitchTracker Baseball - Video

7.3. Video
Welcome to Video! Here in video you have the ability to video your pitching motion! Check your video out
after you pitch or later from history!
At the top of the page you’ll see three (3) icons: pitch icon, a grid and a video camera. The video camera
should be highlighted white.
To record video, just press the red record button at the bottom of the screen! Our video records in a “Set
and Forget” mode. So once you press the record button to start, you won’t need to press it again! The video
will be automatically cut and saved after each pitch.
Pitches will have a small, white video icon next to them to indicate that there is a video saved with that pitch.
When looking at a past session and wanting to view a video, select the video icon at the top of the page
once you enter the session and then select the pitch. The video will begin to play. Selecting the video
screen itself, will pull up video controls on the screen. You can drag the video bar to go through the video in
slow motion.
Pitch Count
Your pitches will appear across the top of the page. Each individual pitch will appear as a diamond with a
number inside. As pitches come in, you will see a green bar go across the top of the page. You can click on
a previous pitch to view it’s metrics. You are able to scroll through the pitches by dragging your finger
across the row of pitches. To close this top drawer select the green circle in the lower right hand corner and
then select Hide Swings. Once done, select the white ‘X’.
Metrics
Your metrics will appear across the bottom of the page. Each metric is represented in a grey rectangle. The
metric name will appear at the top of the rectangle. The metric reading for a swing will appear in large white
letters with the units of measurements. You are able to scroll through your metrics by dragging your finger
across the drawer. To close this bottom drawer select the green circle in the lower right hand corner and
then select Hide Pitches.
To re-open the drawer, select the option again (it will now say *Show Pitches *). Once done, select the
green and white ‘X’.
Metric Preferences
You have the ability to edit the metrics that appear across the bottom of your pitch view. To edit your metrics
that appear, select the grey circle with the white pencil to the right of your metrics. You’ll be taken to a page
that says Metric Preferences.
Diamond Kinetics PitchTracker Baseball - PitchTracker Ba
Page 30 of 76