EasyManua.ls Logo

diatesse XPER - Important Information on Control Solution; Reading the Results

Default Icon
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12 13
READING THE RESULTS
For blood sugar tests
MESSAGE WHAT IT MEANS
< 0.56 mmol/L (10 mg/dL)
>13.3 mmol/L (240 mg/dL)
> 44.4 mmol/L (800 mg/dL)
For β-ketone tests
MESSAGE WHAT IT MEANS
< 0.1 mmol/L
0.1 to 8.0 mmol/L
> 8.0 mmol/L
Important information on the
control solution
Only use TaiDoc (W2) control solution for your
meter.
Do not use the control solution after its expiry
date or later than 3 months after opening it.
Write the date you opened it on the control
solution bottle and dispose of any remaining
solution after 3 months.
The recommended room temperature when
performing a test with the control solution is
between 20 °C and 25 °C (68 °F and 77 °F).
Ensure that the control solution, your meter
and the test strips are at the recommended
temperature before conducting a test.
Shake the control solution well before use
Discard the rst droplet of control solution
and wipe the dispensing tup clean in order to
guarantee a pure sample and accurate result.
Keep the control solution properly sealed at a
temperature between 2 °C and 30 °C (35.6 °F
and 86 °F). DO NOT freeze.

Table of Contents